Provide this information when contacting customer support. Serial No: SW ID: HW Ver: Boot Ver: Prod ID: Board ID: Burn Date: Burn Loc: If you have questions or concerns Contact Technical Support: •Phone: 1-800-228-7667 •Website: •Mail:SPX Service Solutions • 15825 Industrial Parkway • Cleveland, Ohio 44135 • Attn: Technical Support Copyright Information Copyright © 2006-2007 SPX Corporation All rights reserved. The information, specifications and illustrations in this guide are based on the late

The information, specifications and illustrations in this guide are based on the latest information available at the time of printing. SPX Corporation reserves the right to make changes at any time without notice. If you have questions or concerns Contact Technical Support: •Phone: 1-800-228-7667 •Website: •Mail:SPX Service Solutions • 15825 Industrial Parkway • Cleveland, Ohio 44135 • Attn: Technical Support Scan Tool Information Complete the following list using the function “Tool Information”

Asegurar que el instrumento utilizado es capaz de medir el intervalo de reposo. Las luces de regulacion en caja metalica se usan en los sistemas con negativo (-) a tierra de doce (12) voltios solamente. Las luces con caja de plastico pueden usarse en los sistemas con negativo (-) o positivo (+) a tierra de seis (6) o doce (12) voltios, siguiendo las instrucciones que se dan a continuacion. IMPORTANTE CONSULTAR EL MANUAL DEL VEHICULO PARA LA INFORMACION ESPECIFICA ACERCA DEL AFINAMIENTO Y PROCEDI

This should be located under the Other Devices icon or the Universal Serial Bus controllers icon. Then, click Reinstall Driver or Update Driver. **There is usually a yellow question mark or exclamation mark next to the icon and it is usually located under the “Other Devices” folder. If you have trouble locating the icon, reinsure that your tool is plugged in and powered on. 2 CP9180 - USB Driver Installation Instructions 5. Highlight the bullet next to Yes, this time only and click Next > 6

Some 1994, 1995 and all 1996 and newer model Ford vehicles are OBD II-equipped. These vehicles require a Scan Tool or other OBD II-capable tester. Refer to the table below for compatibility information on your specific car, truck or van. Engine & Transmission Codes - 1981 through 1995 1981 2.3L: all Calif. - most elsewhere 4.2L: all 5.0L: all except Calif. and Lincoln Mark VI 5.8L: all except Calif. 1982 2.3L: all Calif. - most elsewhere 3.8L: Calif. only 4.2L: all 5.0L: all excep