Transponder In order to provide the greatest variety possible, there are very different kinds of chip sets and types in different forms of casing.Therefore a corresponding tag can be delivered for almost every application and purpose.Some of them are also available as off-the-shelf products. For example the PUTag.It is available in 3 different sizes and forms.With diameters from 34 mm (1.3”) , over 54 mm (2.2”) up to 90 mm (3.5”). Special attention has been paid to the chemical resistance and th

ecom instruments offers this flexibility for clients projects -large or small. Not all projects require a high number of units and need only an individual and customised solution. Small challenging solutions in particular demand dedicated application. On this and the following pages we showcase the versatility of the i.roc’s x20 by the way of client projects that have already been achieved. Many of these solutions are now part of our standard portfolio. Contact us.We are more than willing to giv

This is more than suf-process this data reliably. ficient for one-dimensional codes, since one line contains all information. After Nowadays there are approximately 30 the introduction of two-dimensional symbologies on the market. The optiocodes the laser scanners were impro-nal integrable CMOS Barcode Imager ved in a way in which deflection mirrors BCx10-Ex fitted to the i.roc x10 can create a second scan line that is genera-read all common barcodes, such as ID ted at a certain angle. linear co

Malux Finland Oy, P.O.Box 69, FIN-06151 PORVOO, Finland Phone: +358 (0)19 57 45 700, Fax: +358 (0)19 57 45 750, Many PDAs provide the possibility to integrate barcode scanners or RFID reading devices via features the considerably more flexible way of integrating modules by interface into an individually designed casing. The dustproof and water-proof casing, consisting of three Many PDAs provide the possibility to integrate barcode scanners or RFID reading devices via features the considerably mo

Complete labels can easily and rapidly be scanned using the integrated CMOS camera. According to the needs and requirements of the client also other reading systems, like classic laser scanners, can be applied. Interfaces With the demand for efficiency of production and logistics, it is essential that high quality radio transmission solutions are availa- ble.The i.roc x20 provides adaptability, so that the latest technology can be applied. Depending on individual requirements, different ways of

Technical data: RF x10 -Ex (13.56 MHz) Operation frequency: 13.56 MHz Write/Read range: up to 80 mm (3.14”), depending on transponder type and environment Speed of data transmissioin: about 26 kB/sec. Writing transponder: < 50 ms per block Reading transponder: < 50 ms per block Transponder types: ISO 15693,Tag-It, I-CODE, EM, SLI, HFI, LRI and Infineon Technical data: RF x11 -Ex (125 KHz) Operation frequency: 125 KHz (134 KHz on request) Write/Read range: up to 80 mm, (3.14”) depending on transp

Charger LG x10 ( Input: 100~240 VAC, 50/60 Hz, 0.3 A, Output: 5VDC (typical), 2A (typical) different country plugs available i.roc 627 -Ex FMClassI,Division1,GroupA-D(Certification620-Exincluded) i.roc 527 -Ex FMClassI,Division2,GroupA-D(Certification520-Exincluded) i.roc 420 Ruggedized Industrial PDA i.roc 623 -Ex ATEXMiningIM1EExiaI-10°C.Ta.+50°CAPPROVEDCUSFMAPPROVEDCUSFMTechnical Data Ex-data device types Keyboard On/off – switch, reset keys, 5 programmable function keys, 5-way navigation fie

Safety Advice 3. Faults and Damage 4. Safety Regulations 5. Ex-Data 6. Technical Data 7. Use and Application / Operating Instructions 8. Repairs 9. Cleaning, Maintenance and Storage 10. Guarantee and Liability 11. Declaration of EC Conformity 12. EC -Type Examination Certificate 13. Certificate of Compliance 1. Introduction 13 The Ex-Time 40 and the Ex-Time 50 are quartz movement wall clocks designed for internal use in Ex-hazardous areas classified as Zone 1 and 2 according IEC/CENELEC or divis

7.4 Time Setting The white adjusting wheel on the quartz mechanism is used to make any necessary time adjustments. 8. Repairs Repairs are subject to the terms and conditions of ELEX V. It is recommended that all repairs are carried out by the manufacturer, so as to check and test the safety and reliability of the unit after any repairs are performed. 9. Cleaning, Maintenance and Storage The entire back face of the unit must only be cleaned with a damp cloth Do not use solvents or abrasive cleani

MCT202 - HART®/DE Modem ecom instruments developed for Honeywell the intrinsically safe Configuration and Maintenance Tool for HART® or DE protocol enabled pressure or temperature transmitters. Comprising of the industrial PDA PC i.roc 627 complete with integrated HART®/DE Modem and software applications MC Toolkit and SDC 625. Variety via flexibility This is only a selection of options that have already been realised.Also for you and your application ecom instruments can be the flexible partner