Patent numbers 5,422,631 and 5,646,602 with foreign patents pending. Audio Authority, and the double-A symbol are registered trademarks of Audio Authority Corporation. Access, AccessEZ, AccessPC, SilenTouch, AutoDamping, AutoLimiting, AutoCal, and TheftAlert are trademarks of Audio Authority Corporation. The software imbedded within the Access™ System is not sold, but rather licensed for this product specific use. The original purchaser is licensed to use this software in this product and this a

By allowing you to convert even the highest bit rate digital signals from coax to optical or vice versa, Audio Authority's digital audio converters provide maximum fidelity and compatability. 977T coaxial input Model 977RPO Digital Optical to Digital Coaxial Converter The 977R (Receiver) converts the optical audio output of a digital source (DVD player or satellite receiver) to coax for connection to Dolby Digital® or DTS® receivers. 977RPO FEATURES & SPECIFICATIONS: • Reliably converts di

AutoSelect is a trademark of Audio Authority. Copyright November, 2006, all rights reserved. Audio Authority Corporation Lexington, Kentucky 2 Audio Authority Model 1171 User Manual Table of Contents Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 General Information. . . . . . . . . . . . . . . . . . . . . . . . . . .

The 1154B is designed to switch high definition component video up to 1080p and audio signals including stereo (analog), digital coaxial, and digital optical audio, all delivered to the viewer with their original vividness, brightness, and clarity. The 1154B includes automatic cross-conversion between digital audio formats, outputting both, and a defeatable AutoSelect logic automatically chooses the active source. Manual control is available via IR remote with discretes (included) or touch-sensi

Two-way video is integrated with high- performance audio to provide a complete intercommunication solution over a single Category 5e or 6 UTP cable. The versatile Model 1500 Counter Station, which can access up to 16 lanes, and the Model 1520 Lane Station can be connected directly to each other in a one-on-one system, or multiples of each can be networked using a Model 1509 Hub for up to two-on-four audio performance or Series 1510 Hub for multi-lane systems (See example diagrams on the followin

The slider switch on the left side of the module is marked “L” and “R”. Position the switch to “L” for LEFT channel function and toward “R” for RIGHT channel or MONO function. (If used for mono operation there will not be a corresponding “L” module.) Also 930 modules are unique in the fact that they share the same GROUP Address with the amplifier group with which they operate. For example, if the front amp product group number is “4”, then the front speaker group number would also be “4”. Finall

Connect bus jacks for all channels whether or not they will be used. Pull two cables to each wallplate location, preferably using a different colored cable jacket for A and B cables. Install an RJ-45 termination on each end of every Cat 5 cable, using EIA-568B pairing (pins 12, 3-6, 4-5, 7-8). If possible, use EZ RJ-45 connectors. Check each cable with a network cable tester – CONTINUITY TESTING IS NOT ADEQUATE – the pairs must match the EIA-568B color code. WHT / ORNORNWHT / GRNBLUWHT / BLUGRNW

Adjust the cable length compensation if the cable between the Driver and the wallplate/receiver is over 100 feet long. Set the compensation at 1 for cables 100-199 ft. long, and 2 for 200-299 ft. cables, etc. Do not permanently mount the wallplate/receivers until after system testing. Carefully connect the A and B cables to the Driver(s), power the source components, TVs and AV receivers, and plug in 9871 power supplies to test the system. Connect a TV to each wallplate/receiver location to refi