In this way, the other person on the call cannot hear your conversation. The FLASH Button (only on the 2500/2554 YMGP models) - Press I Flash I instead of pressing the switchhook for features such as Conference. The Redial Button (only on the 2500/2554 YMGP models) - Press I Redial to automatically redial the last number you dialed. The telephone retains in memory the last number dialed (up to 24 elements) for a period of 24 hours, provided line power is maintained to the telephone. The Hol
39 3.3.8 Ring Tone Type ........................................................................................................ 39 3.3.9 Voice Codec............................................................................................................. 39 3.3.10 Forward Timer ..................................................................................................... 39 3.3.11 Do Not Disturb ..........................................................................................
Then press the MENU/OK to confirm. The 'year' will be flashing. or Press the UP or DOWN button to set the year. Press the MENU/OK to confirm. The 'month' will be flashing. or Press the UP or DOWN button to set the month Press the MENU/OK to confirm. The 'date' will be flashing. or Press the UP or DOWN button to set the date Press the MENU/OK to confirm. The 'hour' will be flashing. or Press the UP or DOWN button to set the hour, including the AM/PM setting or Press the MENU/OK to confirm. The 'm
• Voice Mail indicator. A "Message Waiting" indicator is now shown when a voicemail has been recorded. The list of voicemails is also displayed in the Messages view, showing who left the message, their presence status, and the date and time that the message was recorded. (This feature requires Exchange 2007.) • Call Log view. The Call Log view has also been implemented, showing the list placed, received, and missed calls (This feature requires Exchange 2007). • Configure Finger Print to unlock.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Do not use this product near water (for example, near a bath tub, kitchen sink, swimming pool). Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock. Unplug this product from the wall outlet and refer servicing to our Repair Centre under the following conditions: • When the power supply cord or plug is damaged or frayed. • If the product does not operate normal
All Rights Reserved. No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from 3Com Corporation. 3Com Corporation reserves the right to revise this documentation and to make changes in content from time to time without obligation on the part of 3Com Corporation to provide notification of such revision or change. 3Com Corporation provides this documentation wi
To select a date format: Prefs 1. Press the Prefs context-sensitive soft key, select Misc Options, and then select Time. Change 2. Press the Change context-sensitive soft key. 3. Press the Up/Down navigation key to highlight Date Format in the menu. Change 4. Press the Change context-sensitive soft key to change the Date Format. 5. Press the Up/Down navigation key to scroll and highlight either a month/day (MM/DD) or a day/month (DD/MM) format. 102 Configuring the Avaya 1140E IP Deskphone Config
Slowly slide the new power supply into its bay until the connectors on the power supply are fully engaged with the connectors on the power distribution board. See the following figure. 8. Tighten the two captive screws that secure the power supply to the chassis. 9. Connect the AC power cord to the power supply. Insert the power cord through the strain-relief tie-wrap loop, located to the right of the supply. Tighten the tie-wrap to secure the connection. Note: You can also replace a power suppl
The paged person answers the call after entering a special Page Meet-me code from any IP Deskphone. To use Automatic Preselection (Meet-me page): 1. Lift the handset. 2. Dial the Radio Paging Access FFC. The paging tone sounds (two beeps followed by a dial tone). 3. Dial the number of the party you want to page. After dialing, the ringback tone sounds. Note: The paged person can use any IP Deskphone to enter a Radio Paging Answer FFC, plus their own DN number. 143 Additional call features Additi
Units not containing coded access may be accessed by other radio communication systems. Cordless telephones must not cause interference to any licensed radio service. IMPORTANT When you hear interference, press the /DELbutton to charge the operating channel. DEL 1. HANDSET ANTENNA 2. NEW CALL/MSG(MESSAGE )WAITING LED Indicator: Blinks when recording a new incoming call or when receiving a Message Waiting signal, if you have subscribed to a Voice Mail Message service from your local telephone com