net Contents SECTION I - APPLICATON CONFIGURATIONS....................................................................................................................................................4-33 Configuration 1. Page Port Contact Closure - 3-Zone - One-Way Paging - Single Amplifier - 25/70V AC Speakers Setup Drawing...............................................................................................................................................................................

This product produces invisible CLASS I laser radiation. Do not operate LASER PRODUCT product with any protective covers removed. Contents Page COMPACT DISC & PLAYER CARE INSTRUCTIONS.................................................... 2 INTRODUCTION................................................................................................................ 3 Package Contents ............................................................................................................... ......

Other switches are at installer’s discretion. STATION ACCESS Set switches in black as indicated. Other switches are at installer’s discretion. 1 0 1 0 1 0 The contact closure contact set is provided to signal to external equipment the TAMB2.s operational state. The contact set is single pole, double throw, and changes state from what is screened below the terminals when the TAMB2 becomes active and returns when the unit becomes idle again. Contact Ratings: 0.6A @ 125V AC resistive 0.6A @ 110V DC

Engineered for accurate sound reproduction, each microphone is ruggedly constructed to withstand the demands of sound installations. A variety of types and styles are available including gooseneck, desktop, handheld, wireless handheld/lavaliere, overhead hanging, and surface- mount microphones. Both contemporary and traditional designs provide accurate response and dependable performance, with Bogen’s microphone models are crafted with professional-grade features, including models with rubberize

Make sure that the power is disconnected and all other connections are completed before proceeding. Move the slide switches on the UTI312 to the positions shown below. Use a modular telephone cord to connect the module to the phone system.The center two conductors are used for dry audio and are not polarity sensitive.The Trunk Disconnect feature is not available in this mode. Note:The default time-out is factory set to 30 seconds,and the VOX time-out is set to 6 seconds.If both the default and V

An 8-ohm secondary connects to the speaker and the multi-tap primary connects to the 70V or 25V amplifier output. Model Watts Power Taps Dimensions Shipping Weight (16/carton) T725 4 4, 2, 1, 1/2, 1/4, 1/8 2-1/2" W x 1-1/4" H x 1-3/8" D 9 lb. / carton T72510 ■10 10, 5, 2-1/2, 1-1/4, 5/8 3" W x 1-1/2" H x 1-1/2" D 12 lb. / carton

/ carton

essary. 6. Adjust AMBIENT THRESHOLD until the STATUS LED starts flashing amber, then adjust ACTIVITY THRESHOLD until amber stops flashing. 9 Module Setup, cont. Normal Mode All sources are affected by the gain adjustment process. Background music source will need to be routed through the main mixer inputs, which will be affected by the gain adjustment process. Refer to page 12 for illustration. Start with all POTS turned fully clockwise (AUX IN is not used in this mode). 1. Set MODE Switch to "S

Refer to instructions with cable kits for proper use. 2 IMPORTANT The anchor point and any hardware used to anchor the speaker must be able to support the speaker’s weight under all conditions. IF YOU ARE NOT SURE OF THE PROPER CAPACITY OF THESE ITEMS TO USE, CONSULT A STRUCTURAL ENGINEER. Mount only one speaker per supplied quick-snap clip. 1. 2. 3. 4. Speaker Wiring Wiring is terminated at a snap-lock input con- nector. There are two positive and two nega- tive terminals to accommodate daisy c

Specifications subject to change without notice. 54-2101-01A 0308 Printed in Taiwan. Product Description You have purchased one of the finest pendant loudspeakers available today. Please familiarize yourself with this product by reading and reviewing the following descriptions and diagrams. These loudspeakers include a "spiderless" woofer that utilizes a high-gauss ferrofluid to guide the voice coil through the magnetic field.The benefits over conventional woofers with cloth spiders are several,