REVISED APRIL, 2009 (BL) WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. (FOR MODELS MANUFACTURED SINCE 10/04) CA6450# PRINTED IN TAIWAN A WARNING! This manual provides critical safety instructions on the proper setup, operation, maintenance and service ofthis machine/equipment. Failure to read, understand and follow the instructions given in this manual may result in serious personal injury, including amputat

• No utilice este aparato cerca del agua. • Limpielo solamente con un pano seco. • No bloquee ninguna abertura de ventilacion; se requiere una distancia minima de 10mm alrededor de todo el aparato, para proveer sufi cient ventilacion. • No se debe colocar sobre, ni cerca del aparato, ninguna fuente de llama descubierta, como por ejemplo velas encendidas. • Se debe prestar atencion a los aspectos ambientales en cuanto al descarte de las baterias. • El aparato debe ser utilizado solamente en clima

Espanol inSTRUCCiOnES iMPORTAnTES DE SEGURiDAD lea aTenTamenTe las siguienTes insTrucciOnes anTes De uTiliZar la uniDaD: • Siga todas las recomendaciones descritas en este manual. Guardelo para ocasiones futuras. • No utilice este aparato cerca del agua. • Limpielo tan solo con un pano seco. • No bloquee ninguna abertura de ventilacion. Debera dejar una distancia minima de 10mm alrededor de todo el aparato para una correcta ventilacion. • No coloque este aparato cerca de ninguna llama o fuente d

Use the longest measured distance as your 0 reference and SUBTRACT each speaker distance from this reference. This result is the number you should enter. For example: If the Left is 10 ft from the primary listening seat and the center is 8 ft, you should enter 0 ft into the left (10 ft – 10 ft = 0ft) and 2 ft (10 ft – 8 ft =2 ft) into the center. Measuring and inputting the distance settings for each speaker is a simple process but is does require the installer to follow a simple procedure. Fail

4 3 Calibration Checklist .................................................................................... 5 4 SDEC Hardware Connection ........................................................................ 6 4.1 Audio Connections.............................................................................. 6 4.2 Ethernet Connection............................................................................ 8 4.2.1 Initial Network Connection.................................................

Please refer to the connection diagram for more information. The correct Synthesis Interconnect kit includes all the necessary connections for using the SDEC in the Synthesis system. Please be sure to order the S3000IC or S3000XLRIC for use with SDEC-3000 and S4000IC or S4500XLRIC for use with SDEC-4500. Retrofit kits are also available. Please contact JBL Synthesis Technical Support for more information at 516.594.0300 (USA only). CONNECTION NOTES • Please follow the wiring diagram and the Inpu

Do not overload wall outlets, extension cords, or integral convenience receptacles, as this can result in a risk of fire or electric shock. 20. Never push objects of any kind into this product through openings, as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 21. The apparatus shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed o

NOTE: Although the SDP-5 is shown here, connections for the SDP-40HD are similar. 11 SDEC3000.4500.om.qxd 4/16/09 10:06 AM Page 12 CONNECTION TO THE REST OF THE JBL SYNTHESIS SYSTEM SDEC-4500: Synthesis One Array, Synthesis Atlas 12 SDEC3000.4500.om.qxd 4/16/09 10:06 AM Page 13 CONNECTION TO THE REST OF THE JBL SYNTHESIS SYSTEM SDEC-4500: Synthesis K2 NOTE: Although the SDP-40HD is shown here, connections for the SDP-5 are similar. 13 SDEC3000.4500.om.qxd 4/16/09 10:06 AM Page 14 CONNECTION TO T

• At the installation sites, locate and make a note of all fuel lines, hydraulic brake lines, vacuum lines and electrical wiring. Use extreme caution when cutting or drilling in and around these areas. • Choose a safe mounting location away from moisture. • Make sure there is sufficient air circulation at the mounting location for the amplifier to cool itself. • Mount the amplifier, using the supplied hardware. Specifications • 55W RMS x 4 channels, plus 225W RMS x 1 channel, @ 4 ohms and .1% TH