Dry weather conditions or walking across a carpeted floor may cause you to acquire a static electrical charge. To protect your switch, always: • Touch the metal chassis of your computer to ground the static electrical charge before you handle the switch. • Pick up the switch by holding it on the left and right edges only. Electronic Emission Notices Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class A computing device

Switches supporting both traditional 10Mbps Ethernet and 100Mbps Fast Ethernet are also ideal for bridging between the existing 10Mbps networks and the new 100Mbps networks. Switching LAN technology is a marked improvement over the previous generation of network bridges, which were characterised by higher latencies. Routers have also been used to segment local area networks, but the cost of a router, the setup and maintenance required make routers relatively impractical. Today switches are an id

(Standard Operating) -40. to 70. (Non-Operating) Humidity:5% to 95% (Non-condensing) Vibration: IEC 68-2-36, IEC 68-2-6 Shock: IEC 68-2-29 Drop: IEC 68-2-32 Warranty Limited lifetime warranty 4 DC output redundant power supply connectors (Supports max. power output 150W/12V per port) 1 port 10GBase-LR module with XFP connector Stacking cables length 30cm/1.3m for inter switch stacking connection 10GE XENPAK Optical Transceiver (Link length: 10km; Laser: 1310nm) Small Form Factor Pluggable (Dista

It is also an excellent choice as a small enterprise core switch for Gigabit to the Desktop migration. Ethernet Switch Key Features and Benefits Performance and Scalability The ES4625/ES4549 provides 1 optional 10 Gigabit Ethernet module for 10G uplink to fulfill any bandwidth-eager customer. Optional 10 Gigabit Ethernet XENPAK transceivers can be chosen for different distance fiber uplinks. Start stacking up to 8/4 units for a total of 192 10/100/1000 ports and 8 10G ports for pay as your netwo

With LFP (Link Fault Propagation) support it allows the administrator to easily diagnose link faults on their network. If the Copper or Fibre link fails, the converter forces the link status of the connecting device to also fail. The POE120 Series media converters are fully compliant to the IEEE 802.3af standard. The converters advanced auto-sensing algorithm allows the unit to draw power from any IEEE 802.3af Power Sourcing Equipment (PSE) device (POE100 Series Converter, or PoE Switch) or Powe

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this user’s guide, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interferen

CONFIGURATION This Switch is an unmanaged, but “smart” Switch because programmable administration parameters make the Switch operate more effectively than unmanaged (dumb) switches. This chapter will describe how to configure the Switch. Console Port (RS-232 DCE) The console configuration requires connecting a terminal, such as a Workstation or a PC running a terminal emulation program (such as HyperTerminal, which is automatically installed with Microsoft Windows) a to the RS-232 DCE console po

4 1.1 Managing The Switch ................................................................................................. 6 1.2 Configuration of the Switch ....................................................................................... 7 2 Configuration .............................................................................................................................. 8 2.1 Port Status ...........................................................................................

VP then 25 will display PVID = 1 In the case that you do configure this state and lock the web interface out, then you can recover by connecting to the RS-232 console port and either disabling Tagged VLAN, or adjust the settings via the following options. VE - Enable/Disable 802.1Q VLAN VF – Get 802.1Q VLAN Enable Setting VV – Set PVID VP – Get PVID 19 2.6.1 Enable/Disable VLAN In the 802.1Q VLAN page, you can enable/disable the tag-based VLAN function by clicking the (Enable) or (Disable) hyper

Harsh temperature conditions, vibration, dust, etc. all put higher demands on the quality and reliability of your networking equipment. To survive harsh industrial environments, Alloy provides you with the RNS5/8 Series Industrial 5-port/8-port 10/100Mbps Ethernet Switches. The RNS5/8 Industrial switch is a cost-effective solution ideal for your industrial applications in harsh environments. The RNS5/8 not only gives you high speed data transmission over an Ethernet network, but also provides re