•The daily alarm and countdown alarm tones continue to sound even if you turn off the button operation tone. To turn the button operation tone on and off In any mode (except when a setting screen is on the display), hold down C to toggle the button operation tone on ( not displayed) and off ( displayed). •Holding down C to turn the button operation tone on or off also causes the watch’s current mode to change. •The mute indicator is displayed in all modes when the button operation tone is turned

All sample displays in this manual are shown using dark figures on a light background. •Button operations are indicated using the letters shown in the illustration. •Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be found in the “Reference” section. Timekeeping Mode Countdown Timer Mode Dual Time Mode Alarm ModeStopwatch Mode Press . General Guide •Press C to change from mode to mode. •In an

• To set an alarm that does not include a month (Daily alarm, Monthly alarm), set x for the month. Press D until the x mark appears (between 12 and 1) while month setting is flashing. • To set an alarm that does not include a day (Daily alarm, 1-Month alarm), set xx for the day. Press D until the xx mark appears (between the end of the month and 1) while the day setting is flashing. • When setting the alarm time using the 12-hour format, take care to set the time correctly as a.m. or p.m. (P ind

• See “Digital Time Daylight Saving Time (DST) Setting” for details about the DST setting. DST indicator On/Off status 4. Press A to exit the setting screen. • Resetting the seconds to 00 while the current count is in the range of 30 to 59 causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are reset to 00 without changing the minutes. • The year can be set in the range of 2000 to 2099. • The watch’s built-in full automatic calendar makes allowances for different month

All sample displays in this manual are shown using dark figures on a light background. • Button operations are indicated using the letters shown in the illustration. • Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be found in the “Reference” section. (Light) (Light) Timekeeping Mode Stopwatch Mode Preset Timer Mode Countdown Timer Mode World Time Mode Alarm Mode Press . General Guide • Pres

If all the analog hands are stopped at 12 o’clock... To conserve battery power, the watch is shipped from the factory with its functions disabled. All the watch’s analog hands are stopped at 12 o’clock, and the digital display alternates between the hour and minute. To activate the watch’s functions, press any one of the three buttons. This will cause the analog hands to move to the current time setting. About This Manual •Most of the display examples in this manual show only the digital display

•The configuration of your watch may differ somewhat from that shown in the illustration. To Set Time and Day Setting day 1. Pull the crown out to the first click. 2. Set the day by turning the crown. 3. Push the crown in to the normal position. Setting time 1. Pull the crown out to the second click when the second hand is at 12 o’clock position and the second hand stops. 2. Set the hands by turning the crown. 3. In accordance with a time signal, push the crown in. 24-hour hand The 24-hour hand

Keep the watch exposed to bright light The electricity generated by the solar cell of the watch is stored by a built-in battery. Leaving or using the watch where it is not exposed to light causes the battery to run down. Make sure the watch is exposed to light as much as possible. •When you are not wearing the watch on your wrist, position the face so it is pointed at a source of bright light. •You should try to keep the watch outside of your sleeve as much as possible. Charging is reduced signi

Doing so causes the auto light switch to operate when it is not needed, which shortens battery life. If you want to wear the watch on the inside of your wrist, turn off the auto light switch feature. • Illumination may not turn on if the face of the watch is more than 15 degrees above or below parallel. Make sure that the back of your hand is parallel to the ground. • Illumination turns off after the preset illumination duration (see “To specify the illumination duration”), even if you keep the

All sample displays in this manual are shown using dark figures on a light background. • Button operations are indicated using the letters shown in the illustration. • Note that the product illustrations in this manual are intended for reference only, and so the actual product may appear somewhat different than depicted by an illustration. • Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be