See the section on battery replacement. Use and Installation Instructions The cooker must be installed in accordance with the regulations in force and only used in a well ventilated space. Read these instructions prior to installing or using the cooker and retain them for future reference. The Data Badge is located on the plinth panel. Part No. 4966200004 - 01 Our policy is one of continual improvement in design and development, therefore strict accuracy of illustrations and descriptions cannot

The break away feature will help prevent damage to the downrigger and boat in the event that the downrigger boom or ball would strike an object. If this should occur, the mounting plate of the swivel pedestal will turn, giving way to the unexpected load. The mounting plate can be reset back to any position by following these steps: 1) Locate the 3/8” bolts on the bottom of the top plate (See Figure 1). 2) With the pedestal locked in any position, loosen the bolts 3) Rotate the mounting plate bac

Available in 6, 12, 18, 24, and 36 inch lengths. Mounting to Cannon Deck Mount The Cannon Deck Mount works great for adding stability and easy removal of your pedestal mount. With your Cannon Deck Mount installed on your boat, attach your pedestal mount by removing the thumb screws and fastening the pedestal base to the plate with four 1/4”-20 x 3/8” long flat head screws. 1904000 Deck Mount The Cannon Deck Mount plate is a four inch by three inch clear anodized aluminum plate which allows the h

RETAIN FOR FUTURE REFERENCE. NOTE: Do not return your CANNON accessory to your retailer. Your retailer is not authorized to repair or replace this unit. You may obtain service by: • calling CANNON at 1-800-227-6433; • returning your accessory to the Factory Service Center; 121 Power Drive, Mankato, MN 56001 Please include proof of purchase and purchase date for warranty service with any of the above options. Owner’s Manual 1904030 1904031 1904032 1904033 Pedestal Mount Models & Features 1904030

Within the warranty period, Johnson Outdoors Inc. will, at its option, either repair or replace same without charge (but no cash refunds will be made). The unit must be returned, prepaid and with proof of the date of purchase to the following: . Johnson Outdoors, Inc Cannon Division, 121 Power Drive, Mankato, MN 56001 This limited warranty may be enforced only by the original purchaser; all subsequent purchasers acquire the product "as is" without any benefit of this limited warranty. Repair or

Grill pan and grid Baking dish Oven shelves (2) Literature Aluminium burner bodies (4) Grill pan handle Pan supports (2) Enamelled discs (4) Battery 1.5V LEVELLING Four skid feet are fitted which can be adjusted up or down to level the cooker. CAUTION: Some soft floor coverings may get damaged if the cooker is not moved carefully. STABILITY BRACKET One of the holes in the rear of the cooker can be used to engage a stability bracket. The bracket must be fitted to the wall behind the cooker. The d

OVEN HEAT CLEAN LININGS The oven roof and side linings are coated with a special enamel which has a continuous cleaning action. The higher the oven temperature the more effective the action. In most cases this cleaning operation will proceed during normal cooking. However, if roasting is done frequently, or high temperatures are not used regularly, it may be necessary to run the oven empty at Mark 8 for about two hours. If desirable, they can be wiped with a cloth wrung out in hot soapy water fo

Should the ignition system start to spark slowly - or not at all, the battery will need replacing. See the section on battery replacement. Cooker Instruction Book The cooker must be installed in accordance with the regulations in force and only used in a well ventilated space. Read these instructions prior to installing or using the cooker and retain them for future reference. The data badge is located below the oven door on the plinth panel. Part No. 4966200002 - 01 CONTENTS PAGE Introduction 3

If desirable, they can be wiped with a cloth wrung out in hot soapy water followed by a clean damp cloth. FITTING/REPLACING THE BATTERY The battery is not covered by the guarantee. Use an alkaline AA battery. The battery holder is located in the plinth panel below the oven door. Open the oven door fully. Unscrew the knurled fixing screw anti - clockwise and remove. Withdraw the battery holder just enough to get access to the battery. Fit the new battery with the end marked “+” on the same side o