Self-rimming. DESIGN FEATURES Bowl Depth: 6-1/4" (D22519), 6-7/16" (D23319). Coved Corners: Interior vertical and horizontal corners are rounded to a minimum of 2-1/4" radii. Finish: Exposed surfaces are polished to a satin finish. Underside: As described below. OTHER Drain Opening: 3-1/2". NOTE: Unless otherwise specified, sink is furnished with 4 faucet holes as shown. These sinks comply with ASME A112.19.3-2000. These sinks are listed by the International Association of Plumbing and

Width is front to back. D-Prefix sinks are packed one per shipping carton. Sink bowl is fully undercoated. D6-Prefix sinks are nested 6 units per shipping carton. Sink bowls are sound deadened on bottom only. D50-Prefix sinks are nested 50 units per shipping carton. Sink bowls are sound deadened on bottom only. 3 4 |*-4"^<- 4"^t- 4"->| -1-1/4" -C ■ E is Bowl Depth Model D225194 Illustrated E is Bowl Depth Model D233194 Illustrated D C A ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIME

Self-rimming. DESIGN FEATURES Bowl Depth: 7" (large bowl), 5-1/8" (disposer bowl). Coved Corners: 3" vertical and 2-1/4" horizontal (large bowl), 1-3/4" horizontal (small bowl). Finish: Exposed surfaces are polished to a satin finish with highshine bowl radius. Underside: Fully undercoated to prevent condensation and deaden sound. OTHER Drain opening: 3-1/2". NOTE: Unless otherwise specified, sink is furnished with 4 faucet holes as shown. These sinks do NOT comply with ASME A112.19.3-2

Width is front to back. |^4^4^4^ |*.4'^*4'^*4V| Model DDEMR233224 Illustrated Model DDEMR23322R4 Illustrated HOLE DRILLING CONFIGURATIONS tü |*.4'^*-4'^+4V| 4 4 ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIMETERS MULTIPLY BY 25.4. In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. This specification describes an Elkay product with design, quality and functional benefits to the user When making a compa

Apply a mixture of liquid soap and water to all joints. Bubbles forming show a leak that must be corrected. Correct all leaks at once. 6. Close propane supply valve. 4 Dayton Operating Instructions and Parts Manual Model 3VH20 Operation Review and understand the warnings in the General Safety Information section. They are needed to safely operate this heater. Follow all local codes when using this heater. TO START HEATER 1. Follow all installation, ventilation, and safety information. 2. Locate

Width is front to back. |*4"^«4"«-| 22" 15-3/4" k4"- -4" 3" R y 14" 33" -14"- -2-1/4" R Model DPR1812522 Illustrated -2-1/4" R -15-1/4"- Model DPR1823322 Illustrated 7 7" ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIMETERS MULTIPLY BY 25.4. In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. This specification describes an Elkay product with design, quality and functional benefits to the user.

Underside: Bottom of bowl undercoated to prevent condensation and deaden sound. Self-rimming: Sink is furnished with appropriate number of clamps to provide a watertight installation. OTHER Drain opening: 3-1/2". Faucet holes: Available with 3 faucet holes only, 4" center to center. Note: Sinks only available in multipacks of 18. Model DPR1812522 SINK DIMENSIONS (INCHES)* Model Number Overall Inside Each Bowl Cutout in Countertop (11/2" Radius Corners) Number of 11/2" Dia. Faucet Holes

Si el punta de desconexion de la energia esta fuera del alconce de la vista, asegure el interruptor en posicion abierta y coloque una etiqueta de advertencia para evitar la aplicacion inadvertida de energia. 5. Libere toda la presion dentro del sistema antes de dar servicio a cualquier componente. 6. Drene todos los liquidos del sistema antes de darle mantenimiento. 7. El motor de la bomba esta equipado con un dispositivo automatico de reajuste de proteccion termica, y podria arrancar inesperada

Warranty void if damage to the product results from the use of a part other than a genuine Coleman ® part. COLEMAN SHALL NOT BE LIABLE FOR DEFECTS THAT ARE CAUSED BY THE USE OF UNAUTHORIZED PARTS OR SERVICE. COLEMAN SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY OR CONDITIONS. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS LIMITED IN DURATION

Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. ® Dayton Propane Construction Heater Description Dayton model 3VG81 is a 150,000 Btu/Hr propane construction heater with built-in thermostat. This heater uses propane gas for combustion. It is primarily intended for temporary heating of buildings under construction, alteration, or repair. This heater