In the spaces provided, write the feature access codes for your system. For more information about any of these features, see your system manager or refer to the DEFINITY® Generic 1 and Generic 3 and System 75 8434DX Voice Terminal User’s Guide, 555-230-856. USING THE SOFTKEYS You can display any of the softkey features by pressing Menu and then the softkey below the feature abbreviation. If the feature you want to use is not on the bottom line of the screen, press Next or Prev until you see the

In the spaces provided, write the feature access codes for your system. For more information about any of these features, see your system manager or refer to the DEFINITY® Enterprise Server (ECS), Release 5 8410 Voice Terminal User’s Guide, 555-230-763. USING THE SOFTKEYS If your 8410 has a display, you may be able to access up to 12 features with the softkeys. You can activate available softkey features by pressing Menu and then the softkey below the feature abbreviation. If the feature you wan

Ensure each subsequent chimney section is securely attached by testing as noted in Step 4. Step 6. Select the proper Security Chimneys roof flashing based on pitch of roof. Use chart below for selection: Roof Pitch Model Flat to 6/12 F10F6 6/12 to 12/12 F10F12 Next, slide roof flashing over extended chimney section that previously has been installed above the roof opening in Step 4. FTF10 flashings require flashing spacers. Slide flashing all the way down until the flashing base rests flat on th

Please read and understand these instructions before beginning your installation. Do not alter or modify the fireplace or its components under any circumstances. Any modification or alteration of the fireplace system, including but not limited to the fireplace, chimney components and accessories, may void the warranty, listings and approvals of this system and could result in an unsafe and potentially dangerous installation. IMPORTANT! TO ASSURE PROPER ALIGNMENT OF GLASS DOORS: INSTALL THIS FIRE

Accessed Delivered and listened to. Undeliverable Can't be delivered, usually because the recipient's mailbox is full. You can listen to, re-address, and rerecord the message. Filed Copies and saves the outgoing message to re-send and/or modify. You can check the status of outgoing messages. Or you can select, modify, and resend them. Checking the Status of Messages You've Sent To check the status of outgoing messages: 1. Press 4 from the Main Menu. 2. Listen to the first category and message he

Security Alert: Your Responsibility For Your System's Security Toll fraud is the unauthorized use of your telecommunications system by an unauthorized party, for example, persons other than your company's employees, agents, subcontractors, or persons working on your company's behalf. Note that there may be a risk of toll fraud associated with your telecommunications system, and if toll fraud occurs, it can result in substantial additional charges for your telecommunications services. You and you

WARNING: FAILURE TO USE MANUFAC- TURE PROVIDED PARTS, VARIATIONS IN TECHNIQUES AND CONSTRUCTION MA- TERIALS OR PRACTICES OTHER THAN THOSE DESCRIBED IN THIS MANUAL MAY CREATE A FIRE HAZARD AND VOID THE LIMITED WARRANTY. Chimney and Termination NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. Figure 1 TYPICAL INSTALLATION PRECAUTIONS Note:These fireplace systems are not difficult to install. However, in the interest of safety, it is recommended that the installer be a qualified or certified“tradesman”

E 04/2007 SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE MODEL: MPE-33R This manual will enable you to obtain a safe, efficient and dependable installation and operation of your electric fireplace. Please read and understand these instructions before beginning your installation. Do not alter or modify this fireplace or its components under any circumstances. Any modification or alteration of the fireplace system, including but not limited to the fireplace and accessories, may void the warranty, li

Each submenu choice is explained in greater detail in subsequent sections of this booklet. To select and set your personal mailbox options, you will press Activity Menu, and select from these submenus: 1. Mailing list submenu 1 To create a list 2 To scan an existing list 3 To modify a list 2. Personal directory submenu 1 To create a directory 2 To review a directory 3. Fax option submenu 1 Select a default print number Y or N Turn autoprint on or off 9 Select autodelete Y or N Turn autodelete on

Lucent 0954 cover.L1 3 5/9/98, 12:17 PM © 1998 Philips Consumer Communications L.P. All rights reserved. Printed in Mexico. Issue L1 Lucent 0954 cover.L1 2 5/9/98, 12:17 PM BEFORE YOU BEGIN ........................ 3 INSTALLATION................................. 4 Table/Desk Installation .......................... 4 Wall Installation ..................................... 6 TELEPHONE FEATURE SETUP .........10 Assign Intercom Number .................... 10 Set the Clock. ..........................