
• Do not apply superfluous efforts at work with lens assembly, agile elements and thread connections. • Due to considerable optical magnification of the eye-piece some small structures inside the tube coating in the form of dark and/or white points may be seen in the field of view which does not affect the serviceability of the • The resolving power (resolution) may change in the direction from the center towards the perimeter of the field of view. This is an inherent feature of the image tube t

LAM belongs to Class I laser products in accordance with IEC 60825-1. Here are some common precautions that must be observed. • ALWAYS turn the device off when it is not in use and when you change the battery! • NEVER look into the beam • NEVER subject LAM to excessive impacts • NEVER transport LAM without the case • NEVER disassemble LAM • NEVER reverse polarity of the battery • ALWAYS make sure that the device is fixed firmly on the weapon • ALWAYS remove battery when not in use for a long per

18 • Water-resistant • Built-in powerful I/R illuminator (good for over 200 m) • Automatic brightness protection • Camera/video adaptable • Precision internal windage/elevation adjustments • Standard weaver mount or optional weaver rail or side rail mounts • Long eye relief • Low power consumption. Standard and commonly available 2AA batteries ensure nonstop operation of the device for no less than 50 hours. • Compact size and light weight • Shockproof plastic case CONTENTS 1. Brief description

The device should be located in the position which allows comfortable observation without stretching forward; • Place inserts (4, 5) in the apertures of the rail (2). The insert (4) is placed with a pimple looking downwards in the nearest front slot of the rifle rail. If there is no such a slot, it’s recommended to make it at a gunsmith workshop.. It is recommended to place the inserts at the maximum possible distance from each other; • Place clamps (6) and clamp screws (7) in the inserts (4, 5)

5. OPERATION INSTRUCTIONS.............................. 6. STARTING OBSERVATION ................................. 7. CARE FOR YOUR SPOTTING SCOPE................. 8. WARRANTY........................................................... 9. CUSTOMER SUPPORT.......................................... 10. QUALITY CERTIFICATE.................................... 1. INTRODUCTION Congratulations on your purchase of a Spotter NC 2060x80 spotting scope. The Spotter is an amazing scope designed for hunting, s

SPECIFICATION .......................................................1 3. Spotter 15-45x60 ......................................................2 4. OPERATION INSTRUCTIONS..............................3 Set Up and Mounting......................................................3 5. STARTING OBSERVATION .................................3 6. CARE FOR YOUR SPOTTING SCOPE.................4 7. WARRANTY...........................................................4 8. CUSTOMER SUPPORT.....................

• NEVER direct laser beam at the eyes of people or animals • NEVER aim the unit at the Sun or bright sources of light • NEVER subject the unit to impacts • NEVER transport the unit without its case • NEVER disassemble the unit. This may be hazardous for you due to high voltage currents in the system • ALWAYS keep the unit out of children’s reach • ALWAYS store the unit in a dry place • Caution - use of controls or adjustments, or performance of procedures other than those specified herein may re

To operate it properly, please read this manual carefully. Ignoring operation procedures described in this manual will void your warranty. . NEVER disassemble the unit. . NEVER reverse the polarity of a battery. . NEVER connect the unit to external power sources. . ALWAYS remove battery when the unit not in use for a long period. . ALWAYS keep the objective lenses covered when not in use. . ALWAYS store the unit in a warm dry place. 3 Precautions NC 3-12x50 is the sophisticated precise optical i