(2.4 m) • (1) Allen Wrench (5/16”) • (1) Allen Wrench (1/4”) > (1) Carpenter’s Level » (1) Phillips-Head Screwdriver » (2 each) 9/16” Wrenches and/or Socket Wrenches and Sockets (Deep-Well Sockets 9/16" are Recommended). TO ADJUST TENSION Remove the rim cover from the rim and make adjustments as shown. (9/16”) TO LEVEL RIM (1/4”) INSTALL NET A. Remove nylon net-holder from the rim. B. Reinstall while inserting all net loops into slots along ring as shown. ID# M415221 01/06 2

Line up holes as shown and tap together. NOTE: Make sure holes remain lined up. Secure poles as shown. ODC (° D 10 10 d 9 13 Attach legs to ple assembly using bolts (8) and nuts (13). Attach rim and board bracket to backboard using bolts (11) and nuts (20). 11 Slide backboard assembly over top pole as shown fully tightening bolts (11) and nuts (20). Secure board by inserting screws (6) as shown. 1 P/N 211745 12/04 2 Toll-Free Customer Service Number for U.S. : 1-800-558-5234 htt

El propietario debe asegurarse de que todos los jugadores conozcan y obedezcan estas reglas para la operacion segura del sistema. Por su seguridad, no intente montar este sistema sin seguir cuidadosamente las instrucciones. Revise toda la caja y el interior de todo el material de embalaje para encontrar todas las piezas y/o material instructivo adicional. Antes de comenzar el montaje, lea las instrucciones e identifique las piezas usando el identificador de herraje y la lista de piezas contenido

(2.4 m) (1) Allen Wrench (5/16") > (1) Carpenter’s Level » (1) Phillips-Head Screwdriver » (2 each) 9/16" Wrenches and/or Socket Wrenches and Sockets (Deep-Well Sockets 9/16" are Recommended). TO ADJUST TENSION Remove the rim cover from the rim and make adjustments as shown. A. Remove nylon net-holder from the rim. B. Reinstall while inserting all net loops into slots along ring as shown. ID# M4115221 04/05 2

(2.4 m) (1) Allen Wrench (7/16”) (1) Allen Wrench (1/4”) > (1) Carpenter’s Level > (1) Phillips-Head Screwdriver • (2 each) 9/16” Wrenches and/or Socket Wrenches and Sockets (Deep-Well Sockets 9/16" are Recommended). TO ADJUST TENSION Remove the rim cover from the rim and make adjustments as shown. A. Remove nylon net-holder from the rim. B. Reinstall while inserting all net loops into slots along ring as shown. ID# M4115231 04/05 2

9/16" 3/4" 9/16" 3/4" A. Remove the rim cover from the rim. B. Make adjustments as shown below. Tightening the nut which preloads the spring increases the rim’s resistance to movement - the more the preload, the more force will be required to move the rim downward. A. Retirez l’emballage du panneau. B. Procedez aux ajustements comme indique ci-dessous. En serrant le boulon de precharge du ressort, la resistance au mouvement du panneau augmente – plus il y a de precharge, plus il faudra de force

Es esencial el montaje completo, y el uso y la supervision adecuados para la operacion correcta delsistema y para reducir el riesgo de accidentes o lesiones. Existe una alta probabilidad de sufrir lesiones graves si este sistema no se instala, mantiene y opera adecuadamente. • Si utiliza una escalera de mano durante el montaje, tenga mucho cuidado. • Se recomienda que dos (2) adultos capaces realicen esta operacion. • El clima, la corrosion y el mal uso podrian ocasionar la falla del sistema. •

WARNING 11. 16 4 13 9 4 7 4 10 7 4 10 7 4 16 4 7 4 9 16 4 16 TWO PERSON MINIMUM REQUIRED FOR THIS PROCEDURE. NOT FOLLOWING RECOMMENDATION MAY RESULT IN SERIOUS BODILY INJURY AND/OR PROPERTY DAMAGE. WARNING IMPORTANT! Do not over tighten. 14 14 14 1514 13 14 Cut foam stripping (14) to sizes shown and attach to flat side of H-frame (13) as shown. Then secure H-frame to support arms (9 & 10). NOTE: Install H-Frame (13) with foam striping toward backboard. Do this strip last. 11. 16 4 13 9 4 7 4 10

• Check system before each use for proper ballast, loose hardware, excessive wear and signs of corrosion and repair before use. • Check system before each use for instability. • Never play on damaged equipment. • Keep pole top covered with cap at all times. • See instruction manual for proper installation. In the U.S.:1-800-558-5234 and Canada: 1-800-284-8339 201240 2/99 WARNING 37 Crank Height Indicator Hook 201248 2/99 TO ADJUST BACKBOARD: Position looped end of crank onto hook as shown. Rotat