For fan dimensions, (other countries). specific requirements. see Fig. A. If there is damage to the fitted lead Exhaust air must not be discharged 2. Attach the ducting over the inlets and this must be replaced by the into a flue used for exhausting outlet and secure it with worm manufacturer or service agent. fumes from appliances supplied drive clips. If you have any queries before with energy other than electric. installing these products or after they Requirements of all authorities Connecti

The shape of the decorative hood is not critical, the only place where the the liner and outside cover must meet is at the bottom edge of the metal liner. The decorative hood and liner must fit at the bottom edge in both width and depth. The height of the liner does not have to be the same as the height of the decorative hood, and is generally shorter. J___ LOCATION OF ELECTRICAL 6" c (152) E 5” DECORATIVE HOOD (127) / \ HOOD LINER / \ L ! WIDTH OF LINER 30" TO 36" (762-914)

To obtain local dealer information, visit the Showroom Locator section of our website, wolfappliance. com. Blower Options ■ 1200 CFM internal blower ■ 1100 CFM in-line blower ■ 900, 1200 and 1500 CFM remote blowers Pro hood liners are sold as a shell only. An internal, in-line or remote blower is required. For blower recommendations, visit our website, wolfappliance. com. Baffle Filters Overall Dimensions -<-TOP WIDTH -► SUBTRACT 6” (152) FROM OVERALL WIDTH 3” U- 22 3/4”-► 3” —► (76) |

To obtain local dealer information, visit the Showroom Locator section of our website, wolfappliance.com. Blower Options ■ 1200 CFM internal blower ■ 1100 CFM in-line blower ■ 900, 1200 and 1500 CFM remote blowers Pro island hoods are sold as a shell only. An internal, in-line or remote blower is required. For blower recommendations, visit our website, wolfappliance.com. Recessed Controls Baffle Filters Overall Dimensions UiGLF Pro Island Ventilation Hoods SUBTRACT 18" (457) FROM OVE

An internal, in-line or remote blower is required. For blower recommendations, visit our website, wolfappliance.com. Pro island ventilation hoods are recommended for use with all Wolf cooking appliances. Complete installation specifications can be found on our website, wolfappliance.com. VERTICAL DISCHARGE ONLY FOR ISLAND HOODS. Dimensions in parentheses are in millimeters unless otherwise specified. TOP WIDTH IOP WIDTH

An internal, in-line or remote blower is required. For blower recommendations, visit our website, wolfappliance.com. Pro low-profile wall ventilation hoods are recommended for use with all Wolf cooking appliances. IMPORTANT NOTE: For optimal performance, a Pro 27" deep wall hood is recommended for use with ranges and rangetops that contain a charbroiler or griddle. Complete installation specifications can be found on our website, wolfappliance.com. 1 LOCATION O ELECTRICAL (^ 0 - 5"

Pro low-profile wall ventilation hoods are available in four widths and all have the classic stainless steel finish. You also have the option of a decorative rail. While a classic stainless steel rail is standard on (R) models, platinum or brass rails are available to match the bezels of our dual fuel ranges and sealed burner rangetops. Features Model Options ■ Classic stainless steel finish Model PW302210 PW362210 PW422210 PW482210 ■ Rail (R) models feature a classic stainless Overall Width

To obtain local dealer information, visit the Showroom Locator section of our website, wolfappliance. com. Model PW362210R Pro Wall Hood Blower Options ■ 500 CFM internal blower ■ 600 CFM in-line blower ■ 600 and 900 CFM remote blowers Pro low-profile wall hoods are sold as a shell only. An internal, in-line or remote blower is required. For blower recommendations, visit our website, wolfappliance. com. Recessed Controls Baffle Filters Overall Dimensions UIQLF Pro Low-Profile Wall V

Internal and in-line blowers require a roof or wall cap (not provided). Connect ductwork to the cap and work back towards the hood liner. Use sheet metal screws and aluminum tape or high temperature duct tape to seal joints between ductwork sections. All pro hood liners include a backdraft damper in the tran- sition assembly. Local codes may require the use of an additional backdraft and/or make-up air damper. Contact your local HVAC professional for specific requirements. Backdraft and make-up

Rail option hoods (R) come with a classic stainless steel decorative rail and standoffs. Optional platinum or brass rails match dual fuel range bezels. Pro wall hoods are sold as a shell only; internal, in-line and remote blower options are available. Hand finished Classic stainless craftsmanship steel finish Stainless steel baffle filters Location of rating plate Infinite-speed Welded seams and hemmed edges Recessed easy- access controls Decorative rail (optional) Halogen lighting blower contro