All Rights Reserved. Printed in USA. 3365 6.50 TORQUE RATED BRIGGS 3365CE 6.50 TORQUE RATED briggs 3365PS 6.50 TORQUE RATED BRIGGS R3355H 5.5 HP HONDA OPERATING INSTRUCTIONS ANd PARTS ExPlOSIONS Front Tine Models INTROdUCTION ThANk YOU . . . for purchasing an Earthquake® forward rotating front tine rototiller from Ardisam, Inc. We have worked to ensure that this front tine rototiller meets high standards for usability and durability.With proper care, your rototiller will provide many years of se

Set your audio system to a comfortable loudness level. Earthquake Sound Corporation does not assume liability for damages resulting from the direct use of Earthquake amplifiers or other Earthquake products and urges users to play their music at moderate listening levels. 3 2 1 -1 1/2 1 1/2 1/4 or less 8 6 4 97 100 102 105 110 115 90 92 95 THE CHART (ON THE SIDE) SHOWS THE U.S. GOVERNMENTS OCCUPATIONAL SAFETY AND H E A LT H A D M I N I S T R AT I O N ( O S H A ) REGULATIONS WHICH WERE IN EFFECT A

N o X o v e r point. HIGH LEVEL INPUT: Speaker level inputs with a range of 0.5V to 17V RMS. Specifications Are Subject To Change Without Notice TD5X This information applies to SUB INPUT: This is your s u b w o o f e r channel where the sub RCA outputs from your head unit are inserted. INPUT SELECTOR: This tells the amp to play all channels even if only one pair of RCAs is connected. EXAMPLE: If the head unit only has one pair of RCA outputs then you must plug them into the CH1/2 connections an

LOW LEVELINPUTS: Low level inputs range of 0.2V to 5V RMS. This is where the front and rear RCA outputs from your head unit or other devices are inserted. with a R C A l i n e t h r o u g h t o c a s c a d e a n o t h e r amplifier. N o X o v e r point. 2-WAY 12dB/Oct VARIABLE XOVER: C o n t r o l t h e corresponding channels cutoff frequencies. This feature is disabled when in FULLRANGE This information applies to both HPF and LPF FC6.2 FC6.2 FC6.2 Xover FC6.2 Xover FC6.2 Midrange FC6.2 Midrang

Copyright © Earthquake Sound Corporation Earthquake Sound Corporation • 2727 McCone Avenue Hayward CA, 94545 • Tel 510-732-1000 Sound That Will Move You. TABLE OF CONTENTS Our Thank You................................................................................ 2 Cautions and Advisories................................................................. 2 Signal Sensing Feature.................................................................. 3 Specifications....................................

XOVER KNOB SETTING T2000W/4 MAX INPUT VOLTAGE BEFORE CLIPPING RCA LEVEL SPEAKER LEVEL 50Hz 90Hz 125Hz 170Hz 210Hz 250Hz FC6.2 Midrange FC6.2 Midrange FC6.2 Xover FC6.2 Xover FC6.2 Tweeter FC6.2 Tweeter FC6.2 Midrange FC6.2 Midrange FC6.2 Xover FC6.2 Xover FC6.2 Tweeter FC6.2 Tweeter AUTO ON RESET REMOTE ON LOW LEVELINPUTS: Low level inputs range of 0.2V to 7V RMS. This is where the front and rear RCA outputs from your head unit or other devices are inserted. with a AUTO SIGNAL SENSING: Please re

| (510) 732-1000 | RCS-650 RCS-800 Introduction Congratulations on your choice of RCS Series In-Ceiling Speaker systems, one of Earthquake’s most valued in-ceiling speaker lines. With the proper installation and operation RCS speakers will provide a life a time of durability and high-end performance. It is important that you follow all installation and mounting instructions and recommendations in this manual closely and carefully to insure optimal performance operation and longevity. Features •

| RCS-650 Specifications Woofer Size: Woofer Material: Tweeter Size: Tweeter Material: Power Handling RMS: Power Handling Max: Frequency Response: Sensitivity: Impedance: Crossover: Finish: Weight: 6-1/2” (165mm) Polypropylene 1” (25mm) silk dome/NEO magnet 5 - 80W 160W 45Hz - 20kHz 92dB 8-ohm 12dB/octave filter network with polyswitch White/Paintable 2.48 lbs (1.12kg) 3” (77mm) 8” (203.8mm) 6-3/4” (172mm) 7” (177mm) 3-1/8” (80mm) Frame Diameter: Grille Diameter: Cut-out Hole Diameter: Mounting

| (510) 732-1000 | U.S. Toll Free: (800) 576-7944Table of Contents Safety Instructions....................................................3 Unpacking System Components..............................5 System Installation Considerations..........................5 Connection Tips........................................................ 5 What Your IQ-52 Comes With.................................. 6 Front Panel Features................................................6 Rear Panel Features.............

10) Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments and accessories specified by the manufacturer. 12) Use only a compatible rack or cart for the final resting position. 13) Unplug this apparatus during lightning storm or when unused for a long period of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been da