Go to the "Consumer Service" menu, click on "Question & Answer" to see the most frequently asked questions. You can also see contact details if you need to contact us for technical issues, repairs, accessories and spare parts. IMPORTER Adexi Group We cannot be held responsible for any printing errors. VOR DEM ERSTMALIGEN GEBRAUCH • Samtliche Verpackungsmaterialien im Gerat und darum herum entfernen. • Oberflachen mit einem feuchten Tuch innen und au.en abwischen und das Gerat trocknen lassen. •

You can switch between 120 and 230 V by turning the switch using an ordinary screwdriver. USE • The travel hairdryer’s handle (2) can be folded in and out by holding the handle and either folding it in along the actual hairdryer or folding it out until it locks in place. Always remove the plug from the socket before folding the handle in or out. 1 • The first time the travel hairdryer is used, it may give off a small amount of smoke. This is because an extra layer of protective oil on the heatin

Detachable air concentrator . Cool shot button 4. Hanging loop PRIOR TO FIRST USE Check that you have removed all packaging from your hairdryer. USE • The first time the hairdryer is used, it may give off a small amount of smoke. This is because an extra layer of protective oil on the heating element is being heated up. This is quite normal and not dangerous, and will disappear after a short period of use. • To switch on the hairdryer, set the speed selector (1) to one of the three positions abo

• You should stop the blender at regular intervals to check whether the ingredients have been sufficiently blended/chopped. Using the blender jug 1. Attach the blender jug to the blender shaft (6) with the handle facing you and to the right, and turn it anticlockwise until it locks into place. 2. Place the food in the blender jug. 3. Fit the jug lid (3) by placing it over the blender with the pin to the right of the handle and turning the lid clockwise until it locks into place. 4. Fit the fille

• Do not allow cord to touch hot surface. Let Raclette cool completely before cleaning. •Do not operate Raclette with a damaged cord or if the Raclette has been dropped or damaged. To avoid the risk of electric shock, do not disassemble the Raclette, take it to a qualified serviceman for examination and repair. Incorrect reassemble can cause a risk of electric shock when the Raclette is used. • Close supervision is necessary for any appliance being used by or near children. Do not leave Raclette

SAFETY MEASURES • Incorrect use of the steam iron may cause personal injury and damage to the kettle. • Use the steam iron for its intended purpose only. The manufacturer is not responsible for any damage resulting from incorrect use or handling (see also Guarantee Terms). • The steam iron may only be connected to 230 V, 50 Hz. • The steam iron or cord must not be submerged in water or any other liquid. • Never leave the steam iron unattended when in use and keep an eye on children. • Allow the

Use • Start the appliance by turning the =n/Off button to position "1" (low speed) or position "2" (high speed). o The low speed setting is suitable for juicing soft fruits and vegetables. o The high speed setting is suitable for juicing harder fruits and vegetables. • Feed the selected fruits and/or vegetables into the appliance through the funnel a little at a time, pushing them down using the tamper (1). o Make sure that you turn the tamper so that the groove in the tamper fits into the funne

SAFETY MEASURES • Avoid pulling the cord when removing the plug from the socket. Instead, hold the plug. • Check that it is not possible to pull or trip over the cord or any extension cord. KEY TO MAIN COMPONENTS OF THE APPLIANCE 1. Tamper Normal use of the apparatus • Incorrect use of this appliance may cause personal injury and damage. • Use for its intended purpose only. The manufacturer is not responsible for any injury or damage resulting from incorrect use or handling (see also Guarantee T

o Stop the appliance before removing the tamper to add more fruit/vegetables in order to avoid to avoid splashes. • Keep an eye on the fruit pulp holder and stop juicing before the holder becomes too full. • Place the spout in the up position to stop the juice flow. For example when you wish to empty or change bowl. • Always turn off the power by turning the "On/Off" button to "0" position before taking off the lid. Please note: Do not leave the appliance running for more than 1 minutes at a tim