J Switch the device off and allow it to come to a standstill before you put it down. J Always keep the device clean, dry and free of oil or grease. GB General safety advice/Preparing for use Q Have you understood everything? J Once you have made yourself familiar with the instructions and advice, the functioning and handling of your device, you are finally in a position to start work. Observing the manufacturer‘ s instructions and advice will maximise your safety while working with the device. Q

Caution – electric shock! Dangerous electric current – danger to life! Keep children and other unauthorised personnel at a safe distance when using electrical tools. Explosive material! Keep the device away from rain or moisture. Water entering an electrical device increases the risk of electric shock. V~ Voltage Damaged appliances, power cables and power plugs mean potentially fatal risks from electric shock. Regularly check the condition of the appliance, the power cables and the power plugs.

4. Careful handling and use of electrical power tools a) Do not overload the device. Always use an electrical power tool that is intended for the task you are undertaking. By using the right electrical power tool for the job you will work more safely and achieve a better result. 8 GB General safety advice for electrical power tools b) Do not use an electrical power tool if its switch is defective. An electrical power tool that can no longer be switched on and off is dangerous and must be repaire

Pred branjem stran s slikami odprite navzven in se nato seznanite z vsemi funkcijami naprave. Pred ctenim si otevrete stranu s obrazky a potom se seznamte se vsemi funkcemi pristroje. Pred citanim si odklopte stranu s obrazkami a potom sa oboznamte so vsetkymi funkciami pristroja. Prije nego sto procitate tekst, otvorite stranicu sa slikama i upoznajte se na osnovu toga sa svim funkcijama uredaja. Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschlie.end mit al

The use of ancillaries and accessories other than those recommended in the operating instructions could lead to an increased risk of personal injury for you. Q Before first use Q Charging the rechargeable battery on the device (see Fig. D) note: The battery is supplied partially charged. Charge the battery for at least three hours before first use. You can charge the Li-Ion battery at any time without risk of shortening battery life. Interrupting the charging process does not damage the battery.

Workplace safety .....................................................................................................Page 7 2.Electrical safety.........................................................................................................Page 8 3. Personal safety..........................................................................................................Page 8 4. Careful handling and use of electrical power tools................................................Page 8 5. Ca

J When undertaking prolonged sanding of wood, and in particular when working on materials that give rise to dusts that are hazardous to health, the sander must be connected to a suitable external dust extraction device. J Ensure that there is adequate ventilation when working on plastic, paint, varnish etc. J The belt sander is designed for the dry sanding of large surfaces of wood, plastic, metal and plaster and painted surfaces. The device is to be used for dry sanding only. J Do not sand mate

J Consult the sprayed medium manufacturer’s documentation for information about suitable thinners (water, solvents). 1. Thoroughly mix the unthinned sprayed medium and bring it to average room temperature (20-22°C). Do not increase the temperature to change the viscosity. 2. Add a suitable thinner. 3. Test the viscosity as described above (see Fig. C). NoTE: Never use nitro-thinners to thin synthetic resin paint! Example of DIN guidance material value Car body paint 16-20 DIN-sec Acrylic paint 2

Workplace safety.....................................................................................................Page 8 2. Electrical safety.........................................................................................................Page 8 3. Personal safety..........................................................................................................Page 8 4. Careful handling and use of electrical power tools ...............................................Page 9 Devic

The use of tools and accessories other than those recommended in the operating instructions could lead to an increased risk of personal injury for you. Q Operation Q Operation Take note of the mains voltage! The voltage must agree with the information on the type plate of the appliance (appliances that are designated as 230 V can also be connected to 220 V). Q Switching On and Off Switching on intermittent function: j Press the ON/OFF switch 1 . Switching off intermittent function: j Release the