Iniciar sesión:
Clasificado: Nombre ↑   Descargas   Tarifa   Tamaño ↓  

DCS Elgar Plus

Descargado: 13Tamaño del archivo: 38 kb    Fabricar: DCS  
Categoría: El receptor y el amplificador

3MS/s Analogue outputs: 1 x Balanced pair, 1 x Unbalanced pair 2V or 6V rms for full scale input, switchable PCM Digital inputs: 2 x AES3 or 1 x Dual AES, SPDIF on: RCA (2), BNC (1), TOSlink (1), ST (optional) and SDIF-2 DSD Digital outputs : 2 x IEEE1394 with encrypted data, 1 x SDIF Word Clock input and output: 1 x BNC each Digital output: 1 x SPDIF on RCA phono Sample rates: 32, 44.1, 48, 88.2, 96, 176.4, 192kS/s 2.822MS/s for DSD on 1394 interface or SDIF Power Co

DCS 111 K - W/D/G

Descargado: 6Tamaño del archivo: 97 kb    Fabricar: DCS  
Categoría: Placas

A minimum distance of 100 mm. must be left between the side edges of the hob and any adjacent cabinets or walls. The minimum distance combustible material can be fitted above the hob in line with the edges of the hob is 420 mm. If it is fitted below 420 mm. a space of 50 mm. must be allowed from the edges of the hob. The minimum distance combustible material can be fitted directly above the hob is 700 mm. 650 mm 420 mm 420 mm 100 mm 50 mm 50 mm 55 mm 600 mm 700 mm 420 mm 100 mm 420 mm50 mm 55 mm

DCS CGA 60 WOK

Descargado: 4Tamaño del archivo: 111 kb    Fabricar: DCS  
Categoría: Placas

THE MANUFACTURING FIRM REFUSES ALL RESPONSIBILITY FOR DAMAGES TO PEOPLE, ANIMALS OR OBJECTS, RESULTING FROM THE FAILURE TO COMPLY WITH SUCH PROVISIONS. The appliance is designed to be embedded into heat-resistant cabinetry. Cut a hole in the top of the cabinetry, with the dimensions indicated in fig. 3, at a distance of at least 50 mm from the appliance border to the adjacent walls. WARNING: – The surrounding cabinetry must resist a minimum temperature of 75°C. – The equipment must not be instal

DCS CGA 75 WOK

Descargado: 12Tamaño del archivo: 111 kb    Fabricar: DCS  
Categoría: Placas

– Reassemble all of the parts with care. Replacing the power supply cable If the power supply cable needs to be replaced, it is necessary to use a cable with a section of 3x0.75mm2, type H05VV-F or H05RR-F, complying with the regulations in force. NOTE: The connection to the terminal board must be effected as shown in fig. 10 - 10A: Brown cable L (phase) Blue cable N (neutral) Green-yellow cable (ground) 7 81 2 3 4 5 6A 6 87 9 10 10/A 1 2 3 4 5 6A 6 87 9 10 10/A E -Technical Diagrams E -Technica

DCS CGA 90 WOK

Descargado: 0Tamaño del archivo: 111 kb    Fabricar: DCS  
Categoría: Placas

3 B -Cooking Instructions B -Cooking Instructions Automatic start-up without valves Turn the corresponding knob anti-clockwise up to the maximum position (large flame, Fig. 1) and press start-up button P(fig. 1). Automatic start-up with valves Turn the corresponding knob anticlockwise up to the maximum position (large flame, fig. 1) and press the knob. Once the burner has been started up, keep the knob pressed for about 6 seconds. Using the burners In order to obtain the maximum yield without wa

DCS 34942G

Descargado: 0Tamaño del archivo: 111 kb    Fabricar: DCS  
Categoría: Placas

The rating plate is located on the bottom of the hob. A copy is attached on the back cover of this book. The hob is supplied with a 3 core flexible supply cord incorporating a 3amp plug fitted. In the event of having to change the fuse, a 3amp ASTA approved (BS 1362) fuse must be used. Should the plug need to be replaced for any reason, the wires in the mains lead are coloured in accordance with the following code: Green and Yellow - Earth Blue - Neutral Brown - Live 1) Connect the green and yel

DCS GAS HOB 856001 G

Descargado: 1Tamaño del archivo: 130 kb    Fabricar: DCS  
Categoría: Placas

Contents Important Safety Information .................................................................... 2 Instructions for the User.............................................................................. 6 Description of the Hob...........................................................................................6 Operation ....................................................................................................................7 Maintenance and Cleaning..................

DCS GAS HOB 84602 G

Descargado: 1Tamaño del archivo: 130 kb    Fabricar: DCS  
Categoría: Placas

Any gas installation must be carried out by a registered CORGI installer. The manufacturer will not accept liability, should the above instructions or any of the other safety instructions incorporated in this book be ignored. Installation FO 0814 FO 0264 A) End of shaft with nut B) Washer C) Elbow On the end of the shaft, which includes the GJ 1/2" threaded elbow, adjustment is fixed so that the washer is fitted between the components as shown in the diagram. Screw the parts together without usi

DCS GAS HOB 85600 G

Descargado: 0Tamaño del archivo: 130 kb    Fabricar: DCS  
Categoría: Placas

France Senlis +33 (0)3 44 62 29 29 Germany Nurnberg +49 (0)911 323 2600 Italy Pordenone +39 (0)1678 47053 Sweden Stockholm +46 (0)8 738 7910 UK Newbury +44 (0)1635 572700 Instructions for the Installer Engineer technical data OVERALL DIMENSIONS Width: 580 mm. Depth: 510 mm. Height: 88 mm. Weight: 8 Kg. CUT OUT DIMENSIONS Width: 550 mm. Depth: 470 mm. Thickness: 30 mm. SUPPLY CONNECTIONS Gas: RC 1/2 inch (1/2 inch male) Rear right hand corner Electric: 230-240V 50Hz supply, 3 core flexible cable

DCS HL 7275

Descargado: 2Tamaño del archivo: 144 kb    Fabricar: DCS  
Categoría: Los aficionados





Categoría