Note the following: • Before installing a new screen protector, remove any screen protector that is already installed. A notch in the corner of the screen protector allows you to slide your fingernail or a firm, pliable implement (such as a credit card) under the screen protector for removal. Do not use a metal implement; it could scratch the screen. • To ensure good adhesion, clean the display screen with a soft cotton cloth dampened with denatured alcohol before installing the screen protect

Caution UL Notice: FMW51BC1 External Battery Charger PenCentra 130 Users: Use this battery charger with the CP021031 (FMW51BP1) battery pack only. Stylistic LT Users: Use this battery charger with the 3-cell battery pack CA54200-0502 (FMW29BP2) or 6-cell battery pack CA54200-0506 (FMW29BP1) only. Using the Battery Charger To charge your battery pack(s) in the external battery charger: 1. Connect an FPSI DC power source such as AC adapter FMWAC4A, FMWAC4B, FMWAC4C or auto adapter FMWCB2 to the DC

Caution UL Notice: FMW51BC1 External Battery Charger PenCentraUsers:Use this battery charger with the FMW51BP1 battery pack only. StylisticLTUsers:Use this battery charger with the 3-cell battery pack FMW29BP2 or 6-cell battery pack FMW29BP1 only. StylisticLTC-500Users:Use this battery charger with the 6-cell battery pack FMW43BP2 only. Using the Battery Charger To charge your battery pack(s) in the external battery charger: 1. Connect an FPC DC power source such as AC Adapter FMWAC4, FMWAC14, o

The entire risk as to the quality and performance of the program is with you. In no event will FUJITSU or any of its subsidiaries be liable to you for any damages, including any general, special, incidental or consequential damages arising out of the use or inability to use this program (including but not limited to any loss of profit or savings, loss of data or a failure of the program to operate with any other programs), even if FUJITSU or any of its subsidiaries has been advised of the possib

FTP-622DCL/DSL 4. Connector for paper near end detection (CN5) Part number : B2B-PH-K-S (J.S.T) Mating connector part number : PHR-2 (J.S.T) or equivalent No. Signal I/O Contents No. Signal I/O Contents 1 +5 V — Power for logic (+5 V) 2 NES I Paper near end detect signal 5. Connector for stepping motor drive (CN13) Part number : B4B-PH-K-S (J.S.T) No. Signal I/O Contents No. Signal I/O Contents 1 MT/B O Stepping motor coil excitation 2 MT/B O Stepping motor coil excitation 3 MT/A O Stepping moto

Signal I/O Contents No. Signal I/O Contents 1 PRSTB I Data strobe 2 PRSTB-RET — Connected to logic GND 3 PRDT0 I Data 0 4 PRDT0-RET — Connected to logic GND 5 PRDT1 I Data 1 6 PRDT1-RET — Connected to logic GND 7 PRDT2 I Data 2 8 PRDT2-RET — Connected to logic GND 9 PRDT3 I Data 3 10 PRDT3-RET — Connected to logic GND 11 PRDT4 I Data 4 12 PRDT4-RET — Connected to logic GND 13 PRDT5 I Data 5 14 PRDT5-RET — Connected to logic GND 15 PRDT6 I Data 6 16 PRDT6-RET — Connected to logic GND 17 PRDT7 I D

Note: Ensure that you have the “Headset Only” button turned off when using this feature Using a HEADSET Connect your headset to the socket underneath your digital phone (labelled #2 port – picture of a headset) Press the “HEADSET ONLY” button. The light will go red to indicate that you are in “headset mode” Place the handset on the hook. You are now free to use BOTH the handset receiver and the headset to make or answer calls. To make an outgoing call via your headset: Dial out directly from the

The mini-dock provides connectivity to a wide variety of peripheral devices, including keyboard, mouse, printer, LAN, and external monitor. The mini-dock is designed for stationary counter or desktop use with your Stylistic 3400 pen tablet. This user’s guide provides a brief description of the mini-dock’s features and instructions on using it with your Stylistic 3400 pen tablet. Features The mini-dock features a number of components, interfaces, and connections that are described below and illus

Mobile Accessories ..Issue May 2004 Extend your Pocket LOOX 4xx to your needs. More convenience for your business trips and more functionality enabling easy working. Fujitsu Siemens Computers offers a vast range of accessories for your Pocket LOOX 4xx: cradle station, power supply devices, different storage media, wireless connectivity cards and special cases that provide maximum protection while transportation. Reliability • High quality and stability • Reliability of delivery • Everything you

Single channel memory configuration allow maximum flexibility: Additional memory can be configured as single memory modules. Dual channel memory configurations for maximum performance: For optimum performance memory has to be configured in pairs of memory modules with identical size. S26361-F3372-E413 S26361-F3372-E414 Main memory 1GB ECC Main memory 2GB ECC DDR2 800/PC2-6400 unbuffered DDR2 800/PC2-6400 unbuffered consisting of one module consisting of one module max. 4x per system max. 4x per