Position first pair to channel closest to end of jack. (Do not untwist conductor pairs more than 0.5" from the termination point.) Keep sheath close to jack. 1 Using a 110 punch-down tool, push wires into channels Repeat for subsequent pairs. and trim. 110 punchdown tool 2 When all conductor pairs are terminated, snap on strain relief caps. 3 Wiring Modular Plug (T568A) Wiring a Cat-5 jack Keep sheath close to connector Untwist .5” max. 110 punch down tool The 110 is a sophisticated insulation d

Any change or modification to this device without the permission of Linear LLC may void the user's authority to operate this equipment. Linear® (760) 438-7000 USA & Canada (800) 996-5225 Toll Free FAX (800) 468-1340 OVERVIEW The SVC-10 is a complete audio/video/IR over CAT-5 tranmission system. Each SVC-10 includes a rack-mountable transmitter and a small receiver unit. The SVC-10 can transmit either composite video or S-video and either Pro-logic encoded analog stereo or Digital audio. The

R Power Supply (included) Power Supply Adaptor (included) TV outputs (8) Power LED Modulator inputs (2) Antenna/CATV Model 3308 Top View Accessories 2 The 3308 Coaxial Cable Panel is the heart of a multiroom video distribution system. The 3308 connects as many as 8 televisions to cable or antenna, while maintaining compatibility with ChannelPlus video modulators and the ChannelPlus bi-directional IR repeating system. Model 2010 Power Injector wall plate (fits standard Decora) Model 2184 IR Break

When used with an H511, video received from the H722 is used to create a new channel to add to existing television channels. The H722 is connected to the H511 by a single run of CAT-5 wire. Although this camera mount is intended for use indoors, or under an eave, a drip cap is supplied for use in exposed areas. Two models are available: Model H722 Model H722C Black & White, 2 lux, 3.6 mm lens, smoked window Color, 8 lux, 3.6 mm lens, smoked window Note: The H722 is not a standalone video camera

Make sure gasket is behind camera Add top screws 3 2 Prepare the CAT-5 wires by stripping 1” of outer sheath and 1/8” of insulation. Insert wires into 8 position terminal block and tighten screws. Insert camera at an angle and rotate into place. * multiplex technology, inc. ® * * * 3001 Enterprise Street, Brea, CA 92821-6213, U.S.A. 714-996-4100 800-999-5225 FAX 714-996-4900 TM ChannelPlus® Video Cameras Models H722 & H722C ChannelPlus Enclosures, Modules, Accessories & Wall Plates ChannelPlus m

Problem: Poor video quality at one location. Try this: 1) Check CAT-5 connection from SVD-8 to the SVC-10R receiver. 2) Check proper dial setting on the SVD-8 for that location. Troubleshooting hints: - Problems that appear at all locations are likely due to connection errors between the SVC-10 transmitter and the SVD-8. - Problems that appear at only one location are likely due to connection errors between the SVD-8 and the SVC-10R receiver. - Proper termination is key - verify the correc

Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation, e) If the product has been dropped or damaged in any way, and f ) When the product exhibits a distinct change in performance - this indicates a need for service. 22) Replacement Parts - When re placement parts are required, be sure the service techn

Some states do not allow limitations on how long the implied warranty lasts or the exclusion or limitation or incidental or consequential damages, so the above limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights which may vary from state to state. PERFORMANCE MULTI-ROOM VIDEO Modulator Installation Manual select program IR pll frequency control ABC D model 5545 quad digital modulator with ir output TM Frequency-Agile Multi

warrants this product to be free from defects in materials and workmanship for a period of one year from the date of purchase or MTI will repair, or at its option, replace the defective product. To obtain warranty service, call MTI for a return material authorization (RMA) number and return the product prepaid to Multiplex Technology, Inc., 3001 Enterprise Street, Brea, CA 92821, Attention: Customer Service. Please put the RMA number on the outside of the carton. Any implied warranty arising fro

Do not defeat the safety purpose of the polarized plug. 13) Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. 2 Notes: OO Specifications: typical @ 25 C ± 5 C 5515 Modulator Inputs video 1Vp- p@75 audio 1 V rms @ 47k L & R inputs combined for monaural performance Video differe