. Ensure that the disc surface is clean, and try reinserting it. . Check that the label side of the CD is facing up. ENGLISH 37 ENGLISH 4. The disc is spinning but there is no sound in one or both channels. . Check that both interconnect cables are properly connected between the outputs of the disc player and the inputs of your preampli–er. . Ensure that the preampli–er/ampli–er units being used are properly con–gured. (You may need to consult those units» owner»s manuals for more information.)

When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not

CLASSE AUDIO 5070 Francois-Cusson Lachine, Quebec Canada H8T 1B3 Telephone: +1 (514) 636-6385 Fax: +1 (514) 636-1428 ESPANOL GRACIAS POR HABER CONFIADO EN CLASSE Gracias por haber adquirido el Reproductor de Discos Compactos Classe Audio CDP-10. Nos esforzamos mucho para ofrecer productos que combinen prestaciones sonoras excepcionales y fiabilidad a largo plazo. Para conseguirlo, hemos invertido muchos recursos en la puesta a punto de unas instalaciones de diseno y fabricacion extraordinarias.

• Improve product development Your input helps us continue to design products that meet your needs. • Receive a free Pioneer newsletter Registered customers can opt in to receive a monthly newsletter. • Receive free tips, updates and service bulletins on your new product Register your product at (US) (Canada) Operating Instructions CAUTION – TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD. RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PR

Manual speaker setup This receiver allows you to make detailed settings to optimize the surround sound performance. You only need to make these settings once (unless you change the placement of your current speaker system or add new speakers.). These settings are designed to customize your system, but if you’re satisfied with the settings made in Automatically setting up for surround sound (MCACC) on page 8, it isn’t necessary to make all of these settings. Caution • The test tones used in the S

If you didn’t connect surround speakers choose NO (the sound of the surround channels is sent to the other speakers). • SB – Select the number of surround back speakers you have (one, two or none). Select LARGE if your surround back speakers reproduce bass frequencies effectively. Select SMALL to send bass frequencies to the other speakers or subwoofer. If you didn’t 1 connect surround back speakers choose NO. • SUB W. – LFE signals and bass frequencies of channels set to SMALL are output from t

It works by measuring the acoustic characteristics of your room and neutralizing the ambient characteristics that can color the original source material. This provides a ‘flat’ equalization setting. If you’re not satisfied with the automatic adjustment, you can also adjust these settings manually to get a frequency balance that suits your tastes. Setting the Acoustic Calibration EQ automatically If you have already completed Automatically setting up for surround sound (MCACC) on page 8, ALL CH A

• In the relative system, there is a calibrated, reference volume at which movies are played in theaters, which is duplicated in your environment and referred to as “0 dB.” Regardless of how large or how small the theater, a setting of “0 dB” is always the same, known volume. Changes from that volume level are shown as either positive (louder) or negative (quieter). People who have spent any time making recordings will recognize that this is similar to the notion of “0 dB” on a record level mete

Classe’s Controller Area Network, or CAN-Bus, opens the way to a new level of interaction between our Delta range of amplifiers, preamps, processors and source components. When the SSP-800 is connected with CAN-Bus, the different elements of a Delta series system are in constant communication, creating a “global” network that delivers system wide status information and shared operational features, all through the touchscreen display. CAN-Bus will allow a single Delta series touchscreen to: • Dis

8 Special Design Features ...................................................................................9 flexible graphical user interface................................................................ 9 highly refined circuit design ..................................................................... 9 extensive listening tests ............................................................................ 9 extraordinary longevity ..........................................................