Iniciar sesión:
Clasificado: Nombre ↑   Descargas   Tarifa   Tamaño ↑  

ACR Electronics Nauticast 2607

Descargado: 77Tamaño del archivo: 4 mb    Fabricar: ACR Electronics  
Categoría: equipamiento barco

L ACR Electronics, Inc. // 5757 Ravenswood Road // Fort Lauderdale // FL // 33312-6645 Tel: +1 (954) 981-3333 // Fax: +1 (954) 983-5087 // Please read this first! Warning: Although ACR strives for accuracy in all its publications; this material may contain errors or omissions, and is subject to change without prior notice. ACR shall not be made liable for any specific, indirect, incidental or consequential damages as a result of its use. ACR components may only be used in safety of life devi

ACR Electronics SM-2

Descargado: 47Tamaño del archivo: 386 kb    Fabricar: ACR Electronics  
Categoría: equipamiento barco

Many of our products are required to be tested and approved by regulatory bodies worldwide. We believe in going beyond those specifications to insure our products work when needed in real world conditions. With proper care and maintenance your ACR product will last for years. It is important that you thoroughly read this product support manual to understand the proper care and use of your ACR product. ACR is proud to be certified to ISO 9001: 2000, the International Standard for Quality. Test li

ACR Electronics 3940.1

Descargado: 44Tamaño del archivo: 386 kb    Fabricar: ACR Electronics  
Categoría: equipamiento barco

WE WILL HELP YOU RESOLVE ANY PROBLEMS YOU MAY BE EXPERIENCING. MANY QUESTIONS CAN BE ANSWERED OVER THE PHONE. LIMITED WARRANTY This product is warranted against factory defect in material and workmanship for a period of one year from date of purchase or receipt as a gift. During the warranty period ACR Electronics, Inc. will, at its option, repair or replace the unit at no cost to you for labor, materials or return transportation. For further assistance please contact our Technical Service Depar

ACR Electronics AquaLink 2883

Descargado: 42Tamaño del archivo: 787 kb    Fabricar: ACR Electronics  
Categoría: Equipo de seguridad

Repeated activations could be viewed as a hoax. 11. Preventing false alerts A false alert is any activation of the beacon, intentional or otherwise, that does not result from a situation of grave and imminent danger. Be sure to do the following to help minimize false alerts: . Register your beacon. This does not reduce false alert rates; however, when the beacon is properly registered, the situation can usually be resolved with a phone call. . Be careful with whom you leave your beacon. Make sur

ACR Electronics MS-2000(M)

Descargado: 39Tamaño del archivo: 256 kb    Fabricar: ACR Electronics  
Categoría: equipamiento barco

The quality systems of this facility have been registered by UL to the ISO 9001:2000 Series Standards. Recognized as the world leader in safety and survival technologies, ACR has provided safety equipment to the aviation and marine industries as well as to the military since 1956. About Cobham plc Cobham plc is an international company engaged in the development, delivery and support of advanced aerospace and defense systems for land, sea, air and space. The company has four divisions that colle

ACR Electronics Satellite3 406 RLB-38

Descargado: 33Tamaño del archivo: 1012 kb    Fabricar: ACR Electronics  
Categoría: navegadores GPS y receptores

Turning off the beacon If your beacon was manually activated and you wish to deactivate, return the thumb switch to the “OFF” position. If automatically activated and you wish to deactivate, remove the beacon from the water and dry the unit or place the beacon back into the release bracket. The beacon normally takes up to 12 seconds to deactivate. If deactivation should fail, remove the four screws holding the unit together and unplug the battery to disable the unit. Return the beacon to ACR Ele

ACR Electronics GlobalFix 2842

Descargado: 30Tamaño del archivo: 1 mb    Fabricar: ACR Electronics  
Categoría: Equipo de seguridad

The beacon will slide up and out of the bracket. On either side of the bracket are release tabs. Simultaneously depress each tab to separate the bracket from the mounting block. The mounting block can be held in place to mark the placement of the screw holes or you can use the mounting template provided. The use of #8 pan head stainless steel fasteners and washers (not included) is recommended. Be sure to confirm that fasteners will not contact any wires or plumbing before drilling pilot holes.

ACR Electronics 2662

Descargado: 21Tamaño del archivo: 10 mb    Fabricar: ACR Electronics  
Categoría: equipamiento barco

Lesch 2009-09-27 1.0.8 G Released Software dependencies B.Werner 2010-05-11 1.0.8 H Released Blue Sign Cable clarifications B. Werner Software dependencies This revision of the Manual is valid for the Software version (s) below stated and future versions unless otherwise noted (ref.: / ). Date AIS software Version Status Comments Responsible 2009-07-21 2.0.S116.X714 Released New GPS Module. New way to store ship dimensions A. Lesch 1 General Introduction 1.1 Description of AIS What does the abbr

ACR Electronics 1933

Descargado: 20Tamaño del archivo: 590 kb    Fabricar: ACR Electronics  
Categoría: equipamiento barco

If you have questions regarding the contents of the manual, please contact our Technical Service Department at ACR Electronics, Inc., Telephone +1 (954) 981- 3333. Please be ready to provide the technician with the page number you wish to discuss. If you have a question that is not covered in the manual, please visit our website and access the Frequently Asked Questions (FAQs) section for further information or call our Technical Service Department. The website address is If in the future you lo

ACR Electronics SARLink 2882

Descargado: 19Tamaño del archivo: 787 kb    Fabricar: ACR Electronics  
Categoría: Equipo de seguridad

If someone attempts to register a PLB reported as stolen, NOAA or your national authority will notify the appropriate police department. APPENDIX A - ACCESSORIES 1. Multi-Function Belt Clip The SARLink™ comes standard with a multi- function belt clip. To install the clip, simply align the bottom tabs on the clip with the insert holes located on the bottom of the beacon. Snap the clip in place by pressing the top of the clip so that the two top tabs engage in the two insert holes on the top of th





Categoría