These warnings have been provided in the interest of safety. You MUST read them carefully before installing or using the appliance. If you are unsure of the meanings of these warnings contact the John Lewis branch from which you purchased the appliance. In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensu

full: Press the Start/Pause button to continue the drying cycle. If the water reservoir is full, an active programme will break off automatically and the warning lamp Full tank lights. In order to The water reservoir has a volume of approx. 4 litres. continue the programme, the water reservoir must first be emptied. The condensed water can be used as distilled water, e.g. for steam ironing. Warning! The condensed water is not suitable for drinking or for preparing foodstuffs. However it must fir

Keeping the door open after a wash will also help to preserve the door seal. Maintenance wash With the use of low temperature washes it is possible to get a build up of residues inside the drum. We recommend that a maintenance wash be performed on a regular basis. To run a maintenance wash: . The drum should be empty of laundry. . Select the hottest cotton wash programme. . Use a normal measure of detergent, must be a powder (such as Ariel Futur). External cleaning Clean the exterior cabinet of

Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings. These warnings have been provided in the interest of safety. You MUST read them carefully before use or installation by a qualified person. If you are unsure of the meanings of these warnings contact the John Lewis branch fro

The start of the programme or the countdown of the delay start will occur only after the closure of the door. Until then it is possible to modify the settings. 1. Check that the baskets have been loaded correctly and that the spray arms are free to rotate. 2. Check that the water tap is opened. 3. Press the On/Off button. The dishwasher must be in setting mode. 4. Press one of the two programme buttons to select a washing programme. When a programme is selected the corresponding programme light

Indicator lights Salt 1) Comes on when the special salt has run out. Rinse aid 1) Comes on when the rinse aid has run out. Indicator lights Multi tab Indicates the activation/ deactivation of the Multi tab function (See 'Multi tab function'). 1) The salt and rinse aid indicator lights are never on while a washing programme is running even if filling with salt and/or rinse aid is necessary. 7 The digital display The digital display indicates: • The level of hardness to which the water softener is

Make sure that the connection is correct. The water inlet hose is damaged. Make sure that the water inlet hose has no damages. The appliance does not drain the water. There is a blockage in the sink spigot. Clean the sink spigot. The connection of the water drain hose is not correct. Make sure that the connection is correct. The water drain hose is damaged. Make sure that the water drain hose has no damages. The anti-flood device is on. Close the water tap and contact our extended warranty admin

These warnings have been provided in the interest of safety. You MUST read them carefully before installing or using the appliance. If you are unsure of the meanings of these warnings contact the John Lewis branch from which you purchased the appliance. Installation • This appliance is heavy. Care should be taken when moving it. • Check your dishwasher for any transport damage. Never connect a damaged machine. If your dishwasher is damaged, you should contact the John Lewis branch from which you

2. To a stand pipe provided with vent-hole, minimum internal diameter 4 cm. The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher. The drain hose can face either to the right or left of the dishwasher Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water. The sink plug must not be in place when the machine is draining as this could cause the water to syphon back into the machine. If y

supply. 28 29 Water drain connection The end of the drain hose can be connected in the following ways: 1. To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine. 2. To a stand pipe provided with venthole, minimum internal diameter 4 cm. The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher. The drain hose can face either to the right or l