91000051, Revision B This manual is published by DYNEX Technologies, Inc. Questions or comments regarding the content of this manual can be directed to the address below or to your DYNEX Technologies representative. DYNEX Technologies 14340 Sullyfield Circle Chantilly, VA 20151-1683 USA Tel. (703) 631-7800 (800) 288-2354 Fax. (703) 803-1441 OPSYS MWTM is a trademark of DYNEX Technologies, Inc. © 2006 This document is the copyright of DYNEX Technologies and must not be copied or reproduced in any

Click OK. 3. Restart the computer. Windows will complete the driver installation automatically. Select Specify a location, and click Browse to search for driver files and open it, e.g., (CD-ROM) D:\DRIVER\Win98SE. Click Next. 4. Windows found the driver of this modem. Click Next. Click Finish to complete the installation. Features DX-M300 supports the following communication standards. ITU-T is also known as CCITT. Data • V.92 (Lite) • V.90, V.34, V.32bis, V.32, V.22bis, V.21, V.22 • Be

• Apunte el control remoto al sensor de control remoto del reproductor. • Reemplace las pilas con unas nuevas. La reproduccion del disco comienza, luego se detiene inmediatamente • El reproductor y el disco estan codificados por region. Si los codigos regionales no son iguales, el disco no se podra reproducir. Este reproductor esta codificado para discos de la region 1. • El disco esta sucio. Limpielo. • Se ha formado condensacion en el reproductor. Deje que el reproductor se seque, luego intent

2 Conecte el cable de sincronizacion USB en el puerto USB del adaptador de alimentacion CA y el conector de 30 terminales en la parte posterior de su estacion de acoplamiento. 3 Puede controlar el modo de carga de su iPod por medio del interruptor ON/OFF (Encendido/Apagado) a un lado de su estacion de acoplamiento. 4 El indicador LED se ilumina color verde para indicar que la estacion de acoplamiento esta cargando su iPod. Si mueve el interruptor ON/OFF (Encendido/ Apagado) a la posicion OFF, el

2 Secure the stand column to the stand with the four screws with washers provided. 3 Lay your TV/DVD combo face down on a soft, dry, and lint free surface. Align the bottom side of the TV/DVD combo with one edge of the table. 4 Slide the stand column into the slot in the bottom of the TV/DVD combo. 5 For DX-26LD150A11, secure the stand column to the TV/DVD combo with the ve screws and washers provided. For DX-32LD150A11, secure the stand column to the TV/DVD combo with the eight screws and washe

If your browser is already open, it opens your Home page. ra E-mail Press to start your default e-mail program. ÉfN чл Refresh Press to update the current page in yourWeb browser. Icône Fonction Description CD Précédent Permet de revenir à la page affichée précédemment dans le navigateurWeb. OQ Suivant Permet d’aller à la page affichée précédemment dans le navigateurWeb. О Arrêt Permet d'arrêter le chargement d'une page Web. ★ Favoris Permet d’accéder à la liste des sites Web favoris. P

Turn on the video source you’ve connected, then set OHMS 75/1K on the RF Modulator to the position that results in the best TV picture. The video signal indicator light will be on when the RF Modulator is receiving a signal from an A/V source. To return to normal television viewing, turn the power off on the video component that is connected to the RF Modulator._ RF MODULATOR Audio/Video Signal Converter SPECIFICATIONS RF Output Level_________________________ 66 ± 3.5dB ^V RF Output Channel

Enter your model number in the Search field, then press Enter. Click Support/Downloads. Connecting a DVD or Blu-ray DVD player, cable box, satellite receiver, or game station Using HDMI (best) Using component cables (better) Using composite cables (good) Connecting an antenna/cable wall jack Connect a coaxial cable (not included) to the ANT/CABLE IN jack on the back of your TV and to the Antenna/Cable wall jack. Connecting a Home Theater System Using Digital audio Using Analog audio Front featur

Installing a wall-mount bracket 1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. 2 Remove the four screws that secure the base to the stand, then remove the base. 3 Remove the four screws that secure the stand column, then remove the column. 4 Attach the wall-mount bracket to your TV using the mounting holes on the back of your TV. See the instructions that came with the wall-mount bracket for information about how to corr

2 Lay the TV on a at, cushioned surface. 3 Carefully align and insert the base into the stand until the locking mechanism clicks into place. Installing a wall-mount bracket 1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. 2 Remove the three screws holding the TV to its stand column, then remove the stand column. 3 Insert and lock the stando screws (provided) into into the 4 holes on the back of the TV.. 4 Secure the wall-m