For the best performance, please read this manual carefully as it is your guide through the menus and operation. 1.Read these instructions. 2.Keep these instructions. 3.Heed all warnings. 4.Follow all instructions. 5.Do not use this apparatus near water. 6.Clean only with a dry cloth. 7.Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions. 8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (incl

Vision 85 Anamorphic Lens Mounting Assembly - Exploded View 1.Use the Pitch Adjustment Screws and Washers (item #6) to attach the Vertical Mounting Brackets (item #5) to the Anamorphic Lens (item #1). 2.Place the lens with the brackets installed on top of (or under, if the projector is inverted) the Base Plate (item #2), so that the two threaded posts at the bottom of the brackets pass through the corresponding slots on the base plate. 3.Secure the lens assembly to the base plate with the Yaw/Z-

9 Front / Top View ....................................................................................................................................... 10 Rear / Bottom View ................................................................................................................................. 11 Controls and Functions ............................................................................13 Control Panel ..........................................................................

Vidikron has equipped the Vision™ Model 100t with our advanced, 3-chip DLP™ technology featuring 1280 x 720 native resolution. This technology is integrated into a LightAmp™ engine developed by Vidikron engineers to produce an amazing 3500 ANSI lumens of light output (CSMS™ Light Output of 78.5 ft-Lamberts) for the ultimate video performance in rooms with high ambient light levels. Vidikron’s exclusive all-digital Imagix™ video processing is integrated into the projector chassis for the most adv

2.LIGHT Press to illuminate the buttons. 3.ON / OFF Press to turn the projector on or off. 4.ENT (Enter) Press to select a highlighted menu item or confirm a changed setting. Note On some remote control units, this button is where the RETURN/EXIT button (item #6) appears here. 5.Cursor Buttons (, , , ) Use these buttons to select items or settings, adjust settings or switch display patterns. When no menu is present on-screen, the UP and DOWN buttons toggle through the available aspect ratios, in

Set it to Off, 1, 2 or 3, as needed, keeping in mind that higher settings (which reduce high frequencies) may also “soften” the image. MPEG NR: Select MPEG NR from the Picture Adjust menu to reduce or eliminate so-called “mosquito noise” in MPEG-compressed video signals (digital broadcasts or DVDs). Set it to Off, 1, 2 or 3, as needed to minimize distortion around the edges of moving objects, moving artifacts around edges and/or blotchy noise patterns superimposed over the objects. Sharpness Enh

Input Selection Buttons: Use these buttons to select an input source directly or to enter numeric characters, as follows. 12.VIDEO (1) Press to select Composite video input as the source. 13.S-VID 1 (2)/ S-VID 2 (5) (S-Video) Press to select an S-Video input. 14.COMP (Component) (3) Press to select Component SD (480i/576i) video input as the source. 15.HD 1 (4) / HD 2 (7) Press to select a HD (RGBHV or YPbPr component) input. 16.DVI 1 (6) / DVI 2 (8) Press to select a Digital Video input. Aspect

Throughout this manual, the Vidikron Vision 10/Vision 12 DLP Projector is referred to simply as the “Vision 10/12.” Target Audience Vidikron has prepared this manual to help home theater installers and end users get the most out of the Vision 10/12. Vidikron has made every effort to ensure that this manual is accurate as of the date it was printed. However, because of ongoing product improvements and customer feedback, it may require updating from time to time. You can always find the latest ver

This feature removes all red and green color information from the image (simulating a blue filter), and is useful for color-calibrating the projector or other video components. Save Settings: When you have finished making your adjustments, select Save Settings to store the settings for the current input in the “Custom 1” memory location. Load Saved Settings: To recall stored custom image quality settings, select Load Saved Settings and choose “Custom 1,” “ISF Night” or “ISF Day.” . Projector Sta

The Model 40 has a 1,280-by-720 resolution and utilizes the HD2 chip. B. Take your pick of connection options, including a DVI input with HDCP. DLP projectors have become all the rage in the front-projection home theater arena, thanks in large part to the 1,280-by-720 chips that hit the market a little over two years ago. These chips raised the bar in picture quality for affordable high-end front projection. Vidikron, a front-projection home theater pioneer, was recently purchased by Runco Inter