This phrase may not be repeated in connection with each warning. Assembling a complete bicycle is a complicated task. Only a trained and experienced bicycle mechanic should install components to this frame. Warning: Bicycle assembly requires training and experience. If you do not have the experience and training as a bicycle mechanic, DO NOT attempt the assembly of this bike. Failure to follow this warning may result in serious injury or death. Follow all torque specifications to ensure the best

NOTE: It is recommended that a fine tooth (36 teeth) saw blade be used to avoid the fraying of composite fibers. A carbide grit toothless saw blade is also acceptable. Please abide by the adage: “check twice, cut once!” It’s much easier than buying a new fork. NOTE: Fuji recommends that when cutting a steerer tube, a steerer tube cutting guide tool be used. It is very important that the steerer tube be cut straight. Once the steerer tube is cut, round out the top edge of the steerer tube by usin

Please take a moment to review these carbon fiber care instructions so that you can get the most out of your ride. Also, please note that Fuji is proud to offer a Limited Lifetime Warranty on all of our bicycles. For more information, contact your local authorized Fuji dealer. You can find a list as well as other valuable information about Fuji’s products at Sincerely, Patrick J. Cunnane President, Advanced Sports, Inc. / Fuji Bicycles CARBON FORK INSTALLATION GUIDE Please read the following ins

Grease reduces the friction that is critical to proper seat post grip. Note: DO NOT cut Fuji carbon seat posts! For additional information, please visit the tech section at 2. SEAT POST SIZING All posts: To ensure that the diameter of the seat post conforms to the diameter of the seat tube, check to make sure that there is no play while the seat post is inside the frame. If there is play or the seat post lowers into the frame with no resistance, have an authorized Fuji dealer verify the fit tole