Kohler Co., a su criterio, reparara, rectificara o reemplazara una unidad cuando la inspeccion de Kohler Co. determine que dichos defectos ocurrieron durante uso normal dentro del periodo de cobertura de la garantia indicado anteriormente. Kohler Co. no se hace responsable por los costos de desinstalacion o instalacion donde se reemplace el producto. Todo dano al producto como resultado de errores de manejo, instalacion o mantenimiento inadecuado no seran considerados como defectos de fabricacio

COMPANY Features • Compression molded from our exclusive solid Vikrell® material • Integral apron with removable access panel • Durable high-gloss finish • Pump with air switch and grounding-type plug-in cord • 6 Jets • Optional three-piece wall set with generous storage shelves • 10-year consumer/3-year commercial limited warranty • 16' (406 mm) whirlpool bath depth (floor to top of threshold) • 60-1/4" (1530 mm) x 43-1/2' (1105 mm) x 20" (508 mm) complete unit rough-in dimensions i

COMPANY Features • Compression molded from our exclusive solid Vikrell® material • Shower base can be ordered separately • Durable high-gloss finish • 10-year consumer/3-year commercial limited warranty • Tongue-and-groove 3-piece modular design allows for easy ''snap together" installation • 40-1/4'' (1022 mm) x 40-1/4" (1022 mm) x 80-1/4" (2038 mm) unit rough-in dimensions include flange • 39' (991 mm) x 39' (991 mm) x 79' (2007 mm) complete unit finished dimensions Codes/Standards Ap

En Sterling, nos esforzamos constantemente por mejorar la calidad de nuestros productos. Por lo tanto, nos reservamos el derecho de efectuar cambios en las caracteristicas, embalaje o disponibilidad del producto en cualquier momento, sin previo aviso. Cuidado y limpieza Para obtener los mejores resultados, tenga presente lo siguiente al limpiar su producto STERLING: Utilice un jalador limpiaventanas despues de cada uso de la ducha para eliminar las manchas de agua en la parte interior de los pan

PROVEN PERFORMANCE..! 0: White Other: Refer to Price Book for additional colors/finishes Specified Model Model ADA Compliant Complete Unit Description Colors/Finishes 71140115 60" (1524 mm) ADA compliant bath and wall surround, tile wall, left drain □ 0 □ Other 71140125 60" (1524 mm) ADA compliant bath and wall surround, tile wall, right drain □ 0 □ Other 71240115 60" (1524 mm) ADA compliant bath and wall surround, smooth wall, left drain □0 □ Other 71240125 60" (1524 mm) ADA compliant

Use only ADA compliant components. Studs should be positioned roughly as shown. Bath cannot be installed without the wall surround. The width of the module gets 5/8" (16 mm) narrower at the back. Furring strips (approximately 1/4" (6 mm)) should be used at the back corner studs if drywall will overlap the nailing flange. 6" (I 52 mm) -|4" (356 mm) (Typical) ^ 31-1/4" (794 mm) MJ Ifl Ifl « Ifl M BM 30" (762 mm) ,16" (406 mm) [___1 Backer board locations 8" ' T 15-1/4" (203 mm) I (387

COMPANY Features • Compression molded from our exclusive solid Vikrell® material • Durable swirl-gloss finish • Two toilety shelves and 18' (45.7 cm) towel bar in back wall for added convenience • 10-year consumer/3-year commercial limited warranty • Modular 4-piece design • Backer boards allow for attachment of grab bars • 60' (152.4 cm) x 34" (86.4 cm) seated shower base available separately (model 62041100) • 60' (152.4 cm) x 35-1/4" (89.5 cm) x 60-1/2' (153.7 cm) complete wall sur

1" (25 mm)" 3-1/2" (89 mm) 10" (254 mm) Ove_rflow_p_etail 29" Recommended Support Clip location (4 Total) ft rf8" mm) 21" (533 mm) 4" (102 mm) 3" (76 3-1/2" _ (89 mm) 30" (762 mm) 1-5/8" (41 mm) (25 mm) 9-1/8" (232 mm) 16-1/4" Back Wall (413 mm) (25 mm) 76-1/2" (1943 mm) 24" (610 mm) or 36" (914 mm) Grab Bar 60" (1524 mm) (254 mm) (76 mm) Note: Right and left end walls are the same, only mirrored. T ! Backer board locations PERFORMAtm Page 2 of 2 1065807-4-C 60" (1524

Furring strips (approximately 1/4" (6 mm)) should be used at the back corner studs if drywall will overlap the nailing flange. 6" (I 52 mm) -|4" (356 mm) (Typical) ^ 31-1/4" (794 mm) MJ Ifl Ifl « Ifl M BM 30" (762 mm) ,16" (406 mm) [___1 Backer board locations 8" ' T 15-1/4" (203 mm) I (387 mm) i 0 2" (51 m)' Drain 10" (254 mm) 3-1/2" (89 mm) 60-1/8" (1527 mm) Min Drain Cutout —t8" (203 mm) 22-1/4" (565 mm) 31-1/4" (794 mm) 4" (102 mm) 59-3/8" (1508 mm) 30" (762 mm) 40-

Cutout 3-1/2" „(89 mm) 0 2" -J- (51 mm) 7 3/4" Drain T.074 ^ (197 mm) 60" (1524 mm) Min 60-1/8" (1527 mm) Max— Back Wall 42" -31-1/2" (800 mm) 30" (762 mm) .1-5/8" L)T'F'\(41 mm) 1-1/4" J32 mm) 59" (1499 mm) 39" (991 mm) 10" (254 mm)j 1" (25 mm) 0 D 10" (254 mm) 1" (25 mm)- 15-1/2" (394 mm) 15" (381 mm) ^1-1/2" 1" End Wall k (38 mm) (25 mm)- 2-5/8" (67 mm) (1067 mm) Grab Bar 1" (25 mm) 18" (457 mm) Grab Bar 3-1/2" (89 mm) 21" (533 mm) 2" (51 mm) 3-1/2" (8