Assembling a DINRAIL Bracket and Meda Converter 1. Find your media converter model in Figure 1, 2 or 3 on pages 2 and 3 as listed here: Figure 1 • AT-MC101XL • AT-MC102XL • AT-MC103XL and LH • AT-MC104XL • AT-MC1004 • AT-MC1008/GB • AT-MC1008/SP • AT-GS2002/SP • AT-FS232 • AT-FS201 • AT-FS202 Figure 2 • AT-MC605 Figure 3 • AT-PC232/POE • AT-PC2002/POE 4. For the AT-PC232/POE or the AT-PC2002/POE, install the AC power cord and secure it with the retaining clip provided with the media converter as

All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesis Inc. Allied Telesis Inc. reserves the right to change specifications and other information in this document without prior written notice. The information provided herein is subject to change without notice. In no event shall Allied Telesis Inc. be liable for any incidental, special, indirect, or consequential damages whatsoever, including but not limited to lost profits, arisin

In keeping with the increasing complexity of Allied Telesis' ever-improving and feature-rich software, AlliedWare Plus employs a new modular approach to software creation and distribution. It represents a quantum shift in the software development methodology for Allied Telesis switches and routers - providing you with even more features and greater robustness from the operating system. The AlliedWare Plus operating system combines superior networking functionality and strong management capabilit

E.g. Internet • TACACS+: for ease of management security administration • Layer 2 and Layer 3 ACL • Port MAC address security options Small Form Factor • Standalone switch for remote locations or where stacking is not required • Silent operation (fanless) Allied Telesis Datasheet | Switches AT-8000S/16 Layer 2 Managed Fast Ethernet Switch AT-8000S/16 16 port standalone 10/100TX Layer 2 switch with 1 active SFP bay (unpopulated) and 1 standby 10/100/1000T port (RJ-45) Overview The small form fact

Support for jumbo Ethernet frames enables higher throughput of time sensitive data. Environmentally Friendly ECO-Switch In keeping with our commitment to environmentally friendly processes and products, the AT-9000/28 is the first of our new green range of products designed to reduce power consumption, minimize hazardous waste and even reduce office noise pollution. Among many features including the use of high efficiency power supplies, and low power chipsets we have also included an ECO-Switch

960 Stewart Drive, Suite B, Sunnyvale, CA 94085, USA All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesyn, Inc. Ethernet is a registered trademark of Xerox Corporation. All other product names, company names, logos or other designations mentioned herein are trademarks or registered trademarks of their respective owners. Allied Telesyn, Inc. reserves the right to make changes in specifications and other information contained in th

The TSL feature maintains the bucket level, but as required the bucket can be manually rolled back approximately 20 degrees to allow for increased bucket capacity. If the loader is lowered from this position, the bucket will extend as the quick attach contacts the rollback stop and the circuit goes through relief as described in note 2. ■ . v The relief valve is factory set,at 3250 PSI cracking pressure and is capable of bypassing 10-15 GPM. If loader lock-up should occur due to a low tracto

Hoses should be connected in such a manner that pushing forward on valve handles lowers the boom or dumps the bucket. CAUTION: Always connect boom hoses to float section. Weight added to rear of tractor provides better traction and an easier, more efficient loader operation. Extra weight, along with widening the rear wheels, reduces the risk of roll-over. /f\ I WARNING I The smaller the tractor is, the easier it will roll. We recommend that weight be added to rear tires with liquid or by the

x 20.75 Cyl. Assy. Bucket 24314 3.0 Dia. x 30.00 Cyl. Assy. Lift 811572_3/8 x 15" Hose 3/4 MORB x 3/4 SWFJIC 811471 3/8 x 20" Hose 3/4 MORB x 3/4 SWFJIC 811466 3/8 x 24" Hose 3/4 MORB x 3/4 SWFJIC 812947_3/8 x 22" Hose 3/4 SWFJIC x 3/4 SWFJIC 112833 Tubing - Lift Cyl. Bottom Raise 112834 Tubing - Lift Cyl. Top Drop 112937 Tubing - Lift Cyl. Common (31.0") 112835 Tubing - Bucket Cyl. Bottom Rollbk 112836 Tubing - Bucket Cyl. Top Dump 112837 Tubing - Bucket Cyl. Cross Tube 812128 Elbow 90

They currently use analog cellular or standard phone lines to connect in circuit- switched mode for data transfer. Analog cellular phone service is being discontinued. The combination of the Host RJ-11 IP Gateway, RJ-11 IP Gateway, and the AirLink Raven-E enables remote connectivity between host applications and these remote devices over cellular packet data networks. The RJ-11 IP Gateway provides the bridge between a device requiring an RJ-11 interface and the Raven-E, with its Ethernet interfa