And the FrontRunner™ is no exception. We take pride in the fact that anything bearing the Exmark® name is an exceptional piece of equipment. You can feel confident knowing that it's the brand landscape pros choose 2 to 1 over any other. Visit exmark.com DECK CONSTRUCTION 5.5" deep UltraCut™ Deck 7-gauge sides joined by a continuous bead weld to a 10-gauge top 4-point suspension, full-floating deck with six adjustable anti-scalp rollers CUTTING WIDTH 23 hp Kohler® Command™ SP 27 hp Kohler Comma

2.6.2 Mounting: Hinged to tilt up for access to hydraulic pumps, battery and other components. The seat is held in the tilted position with a linkage. Adjustable fore and aft seat track. 2.6.3 Seat Safety Switch: Internal to the bottom seat cushion, non serviceable. Time delay module incorporated into the Safety Interlock System eliminates rough ground cut-outs. 2.6.4 Armrests: Standard seat: foam padded flip-up armrests. Optional suspension seat: molded adjustable flip-up armrests. 2.7 HYDROSTA

1.6 RIDING ATTACHMENTS Use only Exmark riding attachments. The use of other than Exmark riding attachments may create a hazardous condition resulting in injury. 1.7 SAFETY SIGNS 1.7.1 Keep all safety signs legible. Remove all grease, dirt, and debris from safety signs and instructional labels. 1.7.2 Safety signs must be replaced if they are missing or illegible. 1.7.3 When new components are installed, be sure that current safety signs are affixed to the replaced components. 1.7.4 New safety sig

And the Lazer Z® XS is no exception. We take pride in the fact that anything bearing the Exmark® name is an exceptional piece of equipment. You can feel confident knowing that it's the brand landscape pros choose 2 to 1 over any other. Visit exmark.com engines available STYLE — Triton® High-Capacity Cutting Deck side-discharge standard with option to bag or mulch. widths available 60,' 66" and 72" 10-gauge top that is formed and continuously seam welded, with 10-gauge top reinforcement plate,

- 30 b) Remove inlet screen and fan. c) Engage parking brake. Loosen the jam nuts securing the two 5/16 x 1-1/2” carriage bolts to the hydro control arm. Be sure the hydro control arm is in the neutral position as outlined in the previous adjustment (6.2.5) and the parking brake is adjusted as per previous adjustment (6.2.6). d) Adjust two 5/16 x 1-1/2” carriage bolts in the hydro control arm in or out until the head contacts the butterfly plate, and then tighten jam nuts (See Figure 11). NOTE:

Cassillas 272 Centro de Cassillas Santiago de Chile Phone:(+56) 22010708 garfar_cl@yahoo.com Costa Rica Compania Exim Euroiberoamericana S.A. Los Colegios, Moravia, 200 metros al Sur del Colegio Saint Francis - San Jose Phone: (+506) 2976883 exim_euro@racsa.co.cr Croatia KLIS d.o.o. Stanciceva 79 10419 Vukovina Phone: (+385) 1 6227770 gardena@klis-trgovina.hr Cyprus FARMOKIPIKI LTD P.O. Box 7098 74, Digeni Akrita Ave. 1641 Nicosia Phone:(+357) 22754762 condam@spidernet.com.cy Czech Republic GARD

ELECTRICAL DIAGRAM 38 8. HYDRAULIC DIAGRAM 9. 2-Year Limited Warranty Exmark Turf Equipment (For units purchased on or after October 1, 2004) Conditions and Products Covered Exmark Mfg. Co. Inc. and its affiliate, Exmark Warranty Company, pursuant to an agreement between them, jointly warrant on the terms and conditions herein, that we will repair, replace or adjust any part manufactured by Exmark and found by us (in the exercise of our reasonable discretion) to be defective in factory materials

v Please observe any local restrictions relating to noise levels. Electrical safety: v Keep the extension cable away from the aerator cylinder! v Never use the Electric Lawn Scarifier when it is raining. v Please observe the prescribed local quiet times. v The connecting/extension cable must be checked regularly for damage and signs of wear and tear. v Disconnect the mains plug immediately if the connecting/extension cable is damaged or severed. The coupling socket for the extension cable must b

720,000 & Higher Part No. 4500-231 Rev. A Parts Manual EXMARK PARTS PLUS PARTS_ OVER NIC HT m —"«f If your Exmark dealer does not have the Exmark part in stock, Exmark will get the parts to the dealer the next business day or the part will be FREE Guaranteed!! (Some restrictions apply. See your participating Exmark Dealer for details.) 2 WARNING READ OPERATOR’S MANUAL BEFORE OPERATING OR SERVICING EXMARK EQUIPMENT. TABLE OF CONTENTS Description Page Decal Group......................