1.2 Features • 7-day heating program with factory default energy saving schedule • Time-line display facilitating programming • Subtle, unobtrusive styling matching variety of room decors NOTE: The installation must be performed by an electrician or a qualified installer. 2.1 Baseplate Installation Choose a location approximately 1.5 m above the floor and on an inside wall. Avoid draughty areas (top of staircase, air outlet, etc.), dead air spots (behind doors), direct sunlight or areas near con

No ponga en funcionamiento el aire acondicionado en un invernadero o en una lavanderia, ni cerca de una banera, ducha o piscina. 11. El aire acondicionado esta disenado solo para uso domestico en espacios cerrados, segun el manual del usuario y no esta disenado para uso industrial. 12. Antes de empezar a poner en funcionamiento el aire acondicionado, asegurese de que las entradas de aire (3, 8) y la salida de aire (1) estan abiertas. El aparato de aire acondicionado no debe colocarse detras de c

A built-in time clock is standard. The T775U controller allows a wide range of sensors to be configured. Humidity, pressure, temperature, or any 0-5 Vdc, 0-10 Vdc, or 4-20 mA input is supported. A Reset function is available where the Sensor B temperature (e.g. outside temperature) is used to provide reset control for Sensor A (e.g. humidity). For example, as the outside temperature gets colder, the setpoint can automatically be adjusted to prevent condensation. IMPORTANT The T775U is an operati

The high oil pressure controller should be located as near to the burner as possible. Mounting Mount the oil pressure controller directly on the main pipe. Insert a tee in the pipe line, and connect a pipe nipple of appropriate size to the tee (see Fig. 4). Screw the hexagonal fitting (1/4-18 NPT internal thread) of the pressure controller to the pipe nipple. To avoid leaks and damage to the case, use a parallel jaw wrench on the hexagonal fitting close to the pipe nipple. Do not tighten the pre

The RM7800/RM7840 system consists of a Relay Module. Keyboard Display Modules (standard with RM7800), Dust Cover (standard with RM7840), Subbase, Amplifier, and Purge Card. Options include DATA CONTROLBUS MODULE™, Remote Display Mounting, First- Out Expanded Annunciator and Communications through Modbus™. Functions provided by the RM7800/RM7840 include automatic burner sequencing, flame supervision, system status indication, system or self-diagnostics and troubleshooting. The RM7800/RM7840 is a

3 Installation ......................................................................... 3 Wiring ................................................................................. 4 XL800 Series Power Consumption ................................ 5 I/O Modules ................................................................... 5 Description of the XCL8010AU Controller Module ......... 7 Overview........................................................................ 7 Interfaces and Bus Connectio

• In General interface please input upload interval. • In Detect interface please enable snapshot function for specified channels. Or in alarm interface please enable snapshot function for specified channels. Please refer to the following figure for detailed information. Figure 4-14 Activation Snapshot Setting Priority Please note the activation snapshot has the higher priority than schedule snapshot. If you have enabled these two types at the same time, system can activate the activation snapsh

Features Honeywell Control Systems Ltd. CM907 - User Guide Arlington Business Park, Bracknell 7 day Programmable Berkshire Room Thermostat RG12 1EB Technical Help Desk: 08457 678999 42010943-703 R1 © 2005 Honeywell International Inc. Ergonomic User Interfacefeatures an ‘OK-button’ making the CM907 very easy to use so you always stay in control. Dynamic Text Displayprovides informative ‘on-screen’ feedback and operational assistance to the user. Extra Large LCD (Liquid Crystal Display) Screen wit

Other USB flash drives may also work with the HRDP DVR but have not yet been tested. Manufacturer Model SanDisk Cruzer Talent Flash Corsair Voyager Lexar Kingston Traveler Performance Series DVR User Guide Performance Series DVR User Guide t The Honeywell Performance Series DVRs support a wide selection of PTZ camera protocols: Honeywell MAXPRO Honeywell VCL Honeywell (GC-655P) Honeywell (HSD-250) Honeywell (HSD-251) American Dynamics OpenEye 500 OpenEye 510 OpenEye – Pelco D AcutVista AlfaVisio

The information in this publication does not represent a commitment on the part of Hand Held Products. Hand Held Products shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into