














• Tip the machine forwards again, check the setting and repeat as necessary. Adjust the skids (STH 5.56, STH 8.66, STH 10.66 C) Figure 7 With the skids (1), the distance between the ground and the clearing plate (5) can be set in such a way that no parts of the ground (e.g. earth or stones) can be taken up. • (STH 10.66 C) Set setting lever (Figure 4, item 1) to position II. • Loosen nuts (2) on both sides of the machine. • Adjust skids to conform to the ground conditions: – lower for uneven or