Report any missing or damaged parts to your dealer immediately. Install trim kit after all other fireplace installation work has been completed, thoroughly checked and tested for proper operation, leaks and installation requirements. Tools required: Tape measure Trim kit parts Part # Column Right Assembly 30002073 (1) Column, right 30001978 (1) Boot, right 30001982 (1) Slider Clip, right 30002050 (1) Bracket, On/Off Switch 10005035 (2) 1/4-20 Round Head Screw 1200894 (2) 1/4-20 Wing Scre

If any parts are missing or damaged, contact your local dealer before starting installation. Installation Instructions NOTE: Remove and discard all plastic from packaging. CAUTION: Allow fireplace to cool if it has been in operation. 1. For RN/RP models: Install the ON/OFF switch onto the right side of the trim kit by inserting the ON/ OFF switch with wiring assembly through the prepunched opening of bracket switch mounted on the right side of the trim kit, then connect the wiring to the valve.

Frame Upright Right Assembly Black 10009091 3b. Frame Upright Right Assembly Rustic Bronze 10009031 3c. Frame Upright Right Assembly Pewter 10008972 4a. Plate Pattern Black 10009088 4b. Plate Pattern Rustic Bronze 10009028 4c. Plate Pattern Pewter 10008819 5a. Access Panel w/Stud Assembly Black 10009090 5b. Access Panel w/Stud Assembly Rustic Bronze 10009030 5c. Access Panel w/Stud Assembly Pewter 10008796 Marquette Trim Kit Replacement Parts Marquette Trim Kit Replacement Parts (continued) Ref.

If any parts are missing or damaged, contact your local dealer before starting installation. Installation Instructions NOTE: Remove and discard all plastic from packaging. CAUTION: Allow fireplace to cool if it has been in operation. 1. For RN/RP models: Install the ON/OFF switch onto the right side of the trim kit by inserting the ON/ OFF switch with wiring assembly through the prepunched opening of bracket switch mounted on the right side of the trim kit, then connect the wiring to the valve.

3 1a,b,c 3a,b,c 2a,b,c 4a,b,c 5a,b,c 6 7 8 13 12 9 10 11 15 17 19 20 18 24 16 22 23 14 21 8881 Marquette parts 3/06 CFM Corporation reserves the right to make changes in design, materials, specifications, prices and discontinue colors and products at any time, without notice. Ref. Description Marquette 1a. Panel Top w/Hood Assembly Black 10009087 1b. Panel Top w/Hood Assembly Rustic Bronze 10009027 1c. Panel Top wi/Hood Assembly Pewter 10008798 2a. Frame Upright Left Assembly Black 10009092 2b.

(Fig. 3) Installation complete. 10008881 3/06 Rev. 1 .......... ........................ .................. Trim Kit Asssembly KT591 Fireplace Fig. 2 Install trim kit. .......... .......................................... .......... .................. KT592 Fig. 3 Install panel access bottom. ............ .................. ................ .................. CAR178 Fig. 1 Carton contents. Romanesque Trim Kit Assembly Romanesque Panel Access Bottom Marquette Trim Kit Assembly Marquette Panel Acc

1) 3. Place the column left assembly (30002074) onto the key. (Fig. 2) 4. Install the upper mountingbracket. Use the upper mounting bracket marked R (30002054) for the LHER20. Use the unmarkedupper mounting bracket (30002053) for LHEC30and LHEC20. (Fig. 3) 30001987 8/08 Rev. 4 5. Fasten the upper mounting bracket to the key with a 1/4-20 wing screw and 1/4 flat washer finger tight. (Fig. 3) 6. Fasten the upper mounting bracket to both column assemblies using (2) 1/4-20 wing screws and (2)

Replacing the original style inner top requires a complete rebuild of the stove. Once the new style inner top is in place, if you need to replace the insert you can do so by removing only the stove top. Work in a clear, well-lighted area. If possible, work outdoors. If you must work indoors, use a drop cloth and protect the surrounding area. Wear gloves, a dust mask and protective eyewear. Kit Contents: • Inner top casting insert • Inner top insert • Refractory insulator • 2 pieces of Interam ga

Frame Side Upright Left Assembly Pewter 10008818 3a. Trim Top Assembly Black 10008777 3b. Trim Top Assembly Rustic Bronze 10008809 3c. Trim Top Assembly Pewter 10008820 4a. Key Stone Assembly Black 10008778 4b. Key Stone Assembly Rustic Bronze 10008805 4c. Key Stone Assembly Pewter 10008816 5a. Panel Access Assembly Black 10008793 5b. Panel Access Assembly Rustic Bronze 10008810 5c. Panel Access Assembly Pewter 10008822 6. Screen Mesh Bottom 10008791 7. Screen Mesh Top 10008797 8. Support Access

Panel Access Assembly Rustic Bronze 10008810 5c. Panel Access Assembly Pewter 10008822 6. Screen Mesh Bottom 10008791 7. Screen Mesh Top 10008797 8. Support Access Panel Black 10008803 9. *8-32 Hex Nut Black Oxide 20009807 10. #6-32 x 500” Pem Stud 20010629 11. #6-32 x 500” Pem Standoff 20010630 12. 5-32 Push Retainer 20010633 13. Bracket ON/OFF Switch 10005035 14. Screw #8-18 x 1/2” Sheet Metal 7521901 15. Retainer Bottom Black 10008791 16. Retainer Top Black 10008797 1a,b,c 2a,b,c 3a,b,c 4a,b,