CONFIRMED 4. Please note: To re-program temperature and coffee strength see chapter T. O) Installing and Activating the Clearyl Cartridge. (watch DVD for details) Rinse cartridge under running water. Attach extension rod. Remove water tank (empty), pull up cartridge holder lid and install the cartridge to fit snugly inside the fins. Close cartridge holder lid and fill tank with water and replace. You MUST ACTIVATE the filter NOW! COFFEE READY. Push and hold the Rotary Dial until you hear a beep.

2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against fire, electric shock and personal injury, do not immerse cord, plugs, or appliance in water or other liquid. 4. Close supervision is necessary when any appliance is used by or near children. 5. Unplug from outlet when not in use and before cleaning. Allow it to cool before putting on or taking off parts, and before cleaning the appliance. 6. Do not operate any appliance with a damaged cord or plug or after the appliance ma

Watch the DVD instructions! Traces of Coffee Grounds in New Machine? This is normal! Grinder was tested during assembly with beans. Despite cleaning, traces of ground coffee may be found. RED TEXT represents display text. Illustration numbers on next page correspond with Operating Instructions. A) First Time Ever Preparation 1. Fill water in tank, open Cover Lid (spring activated!), remove Bean Container Safety Lid and add beans. Only regular beans, no flavored or coated beans!!! Replace Bean Co

c. Place a large cup underneath the steam nozzle and turn the SW dial to the hot water position (fig. 2c). Fill with 3 to 4 oz. of hot water. This cleans the nozzle. d. Immerse the four frothXpress parts in the cup with hot water. This will force out any milk. Assemble when you need it again. Make sure that the small "o-ring" in the knob is clean and seated properly (fig. 15). When cleaning the milk container please make sure that the seal and the straw are inserted properly into the milk contai

8) = coffee filling position Please practice the operation of the lever and the carousel a few times. 6. INITIAL PREPARATION This procedure is necessary before first use and after you have cleared the machine (see CLEARING THE THER- MOCOIL, chapter 15.4). a. Plug in the machine. (The machine has an internal cord storage. Just pull out as much cord as you need. You can push the unwanted part of the cord back into the machine). b. Remove the water tank lid, lift out the water tank, and fill with c

Shake off any access water and wait for one minute. • If all five fields of the test stick turn reddish, set the hardness level to 4. If four fields turn reddish, set the hardness level to 3. If three or less fields turn reddish, leave the level in position 2. You can change the hardness settings as follows: COFFEE READY • Open cover for programming buttons (Fig.1,19) and press and hold the P button (Fig.3A,P) until you hear a beep. PRESS KEY / POWDER QUANTITY • Press the + button several times

• Stovetop Mocha Machines. • Manual filters with manual brewing. EXTRA FINE: • Some espresso pump machines. • Manual preparation of Turkish coffee (two finest settings). Helpful Hints: • For espresso pump machines and automatic coffee centers: If your coffee or espresso brews too fast, try finer settings. If your espresso brews too slow, try coarser settings. • For French Press: Please follow the instructions of your French Press coffee maker (after pouring water over the ground coffee, stir tho

• FAX us at 1-201-767-9684 • E-MAIL at contact@capresso.com • WRITE to Capresso Inc., Customer Service, P.O.Box 775, Closter, NJ 07624 3 Contents... Page Important Safeguards ..............................................................................2 Welcome and Thank You .........................................................................3 How to Reach Capresso....................................................................3, 14 Line Drawings (Figures 1 -14)........................

11 a. How to Decalcify with White Vinegar ......................................... 11 b. Using other Decalcifying Agents ............................................... 11 11. Troubleshooting .............................................................................. 11 12. How to Contact Jura-Capresso ................................................... 12 13. Customer Service .......................................................................... 12 14. Limited One Year Warranty ........

Make sure that all three holes and the groove of the tip are completely free of hardened milk. Otherwise you won’t get frothy milk (see chapter 14c for cleaning). b. Initially the frother tip is attached more than finger tight at the factory. Before first use, loosen the tip using a coin (see fig. 13). Make sure the tip is screwed on finger tight. If the tip is sitting loosely on the frother, steam and air will escape to the sides. You won’t get frothy milk. FOR FROTHING: the cylinder of the fro