GP201 Manual Revised 060208 NOTES 2 Alante. GP201 Manual Revised 060208 FOR YOUR RECORDS Please fill in your Alante.™ information below. This information will be useful in the event that you ever need to contact Golden Technologies, Inc. concerning your power chair. Your Alante. ™ Model: Alante GP201 Serial Number _______________ Date of Purchase _______ Body Color __________________ Options ________________ The Golden Technologies Dealer where you purchased this product: Name __________________

Seating The Golden Technologies Buzzaround Lite seat is available in black vinyl. Page 16 Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR Updated 07/08 RIDING YOUR BUZZAROUND LITE™ MOUNTING Note: For you first driving sessions, make certain that your Golden Technologies Buzzaround Lite™ starts out on a level surface and that you will continue driving on a level surface. To Get On Your Buzzaround Lite WARNING: BE SURE YOUR SEAT IS LOCKED IN THE FORWARD POSITION BEFORE OPERATING. • Make

We are honored you have chosen Golden Technologies for your mobility needs. LiteRider™ Models GL110/GL140 Standard Packing List: 1 Owner’s Manual 1 Consumer Instructional DVD 1 Battery Pack 1 Under-the-seat Basket 1 Front Basket 1 Seat with Armrests 2 Keys Battery Charger Seat Post Nut and Bolt DISCLAIMER We ask that you read this manual completely before operating your new Golden LiteRider™. Golden Technologies, Inc. is not and cannot be held responsible for any damage or injury incurred

This information will be useful in the event you ever need to contact Golden Technologies, Inc. concerning your power wheelchair. Your Alero: Serial Number: Date of Purchase: Additional Options: Your Golden representative or dealer: Company Name: Address: Phone: Please remember to fill out and send in your Warranty Registration Card. Failure to do so may delay or void servicing of your Alero. 2 Golden Alero GP52SS Owner’s Manual Revised 0807 TABLE OF CONTENTS INTRODUCTION…………………………………………………………..

See #2 on figure 8. 3. Position the seat post at the desired height while aligning the holes in the seat post and the seat pedestal. 4. Reinstall the nut and bolt. 5. Replace the seat back onto the seat pedestal. Figure 8. Seat Height/Rotation Adjustment Figure 6. Armrest Width Adjustment Figure 7. Flip-up/Angle Adjustment 18 LiteRider™ Owner’s Manual V. OPERATION Rev.A_122810 FREEWHEEL MODE Your Golden LiteRider™ is equipped with a freewheel lever that can set your scooter in or out

Exceeding the maximum weight rating will void the warranty. Exceeding the maximum weight rating may result in injury to yourself and to others. This will also void your warranty. WARNING 5 Compass Owner's Manual—Models # : GP600 SS, GP600 CC, GP601 SS, GP601 CC Revised 02/20/08 SAFETY DRIVING ON AN INCLINE ♦ Drive with caution when attempting to negotiate any incline, even handicap access ramps. ♦ Always climb or descend a gradient by driving straight up or straight down the face of the

Jam Nut Figure 19 Footrest Adjustment Screw 21 Alante. GP201 Manual Revised 060208 COMFORT SETTINGS Cont. FOOTREST HEIGHT ADJUSTMENT 1) Remove the shroud 2) Use an Allen™ wrench to remove the bolts indicated in Figure 20. 3) Slide the footrest to the desired height. 4) Align the bolt holes in the footrest and the footrest bracket. 5) Install and tighten the bolts. Figure 20 FOOTREST EXTENDING 1) Lift the rubber pad from the footrest plate. 2) Loosen the two (2) footrest adjustment screws. 3) Sli

The Consumer must have a warranty registration card filed with Golden Technologies to receive service. This warranty supersedes all previous warranties for all scooter models effective June 1, 2008. The warranty covers the following scooter models: • Buzzaround • Companion GC222/223 • Companion GB106/106XR/106XP3 • Avenger GA531/541 GC322/323/325 • Liteway GL100 • Companion GC422 Lifetime Limited Warranty: For the life of the scooter, from the date of purchase from an authorized Golden Technolog

2. Never put your power chair in freewheel mode while you are operating your power chair. THERMAL ROLLBACK Your Compass™ is equipped with a safety system. A microprocessor monitors the operating temperatures of the controller. In the event of excessive heat occurring in the controller, the controller will decrease the speed of your chair. This is done to reduce the load on the electrical system and allow the components to dissipate heat. The controller will automatically set the chair’s speed ba