Please call Compatible Systems Technical Support if your router shows a software panic. Appendix C -LED Patterns and Test Switch Settings MicroRouter 1220i Switch Settings 0 Normal Operation 1 Unused* 2 Unused* 3 Run Boot ROM Downloader 4 Unused* 5 Erase Flash ROM (OS and Configuration) 6 Erase Flash ROM (Configuration Only) 7 Unused* 8 Unused* 9 Allow letmein password for 5 minutes after powerup . Caution: Settings marked with an asterisk may erase your Flash ROM. Please do not use these settin

Other trademarks are the property of their respective holders. Part number: A00-1869 FCC Notice: This product has been certified to comply with the limits for a Class A computing device, pursuant to Subpart J of Part 15 of FCC Rules. It is designed to provide reasonable protection against radio or television communication interference in a commercial environment. Operation of this equipment in a residential area could cause interference with radio or television communication. Table of Contents I

C. Click OK. You may repeat Step 8 as needed to add all users. 9. Save the configuration to a file and download to the device. A. From the File menu choose Save To > File. This will bring up a file save dialog box. Name the device configuration file, making sure that you associate the file name with the IntraPort 2/2+ and can find the file later. B. From the File menu choose Save To > Device. This will bring up a download configuration dialog window. Choose the IntraPort 2/2+ if given the option

IntraPort, RISC Router, MicroRouter and Compati- View are trademarks of Compatible Systems Corporation. Other trademarks are the property of their respective holders. Copyright© 1997-1999 by Hi/fn, Inc. Includes one or more U.S. Patent Nos.: 4,701,745; 5,003,307; 5,016,009; 5,126,739; 5,146,221; 5,414,425; 5,414,850; 5,463,390; 5,506,580; 5,532,694. Other Patents Pending. Part number: A00-1619 FCC Notice: This product has been certified to comply with the limits for a Class A computing device, p

Otherwise, see the section later in this chapter on Setting Up Telnet Operation for information on setting the server to allow Telnet access from hosts on its network. Temporarily Reconfiguring a Host for Command Line Management You can temporarily reconfigure an IP host in order to set the server’s IP parameters to allow in-band Telnet access. If you wish to set the server’s basic IP parameters in this fashion, the host must be on the same Ethernet segment as one of the server’s Ethernet interf

Other trademarks are the property of their respective holders. Part number: A00-1265 FCC Notice: This product has been certified to comply with the limits for a Class A computing device, pursuant to Subpart J of Part 15 of FCC Rules. It is designed to provide reasonable protection against radio or television communication interference in a commercial environment. Operation of this equipment in a residential area could cause interference with radio or television communication. Chapter 1 -Introduc