Bath whirlpool shall be made of cast iron with Safeguard® finish. K-772-Nl bath whirlpool shall have 6 Flexjets, 2 hp variable speed pump, 1.5 kW heater, back-lit user control, and pulsating neckjets with pillow. K-772-H2 bath whirlpool shall have 6 Flexjets, 1.5 hp variable speed pump, 1.5 kW heater, and back-lit user control. Bath whirlpool shall be UL listed. Bath whirlpool shall be less all trim. Bath whirlpool shall be Kohler Model K-772- - . We reserve the right to make revisions with

THR'D. 1-1/2” O.D. Mfl -;—2-3/8”' T~4” (10.2cm) / (6cm) 2-3/4” (7cm) 24” (61cm) 32” (81.3cm) WOOD BASE/CERAMIC FLOOR RAIL 51-3/8” (130.5cm) WOOD BASE/CERAMIC FLOOR RAIL Kohler Co., Kohler WI U.S.A. 2 110050-2-AB 3. PRODUCT REQUIREMENTS A. SUMMARY OF KEY REQUIREMENTS B. PRODUCT INSPECTION • Observe all local plumbing and building codes. • Install the unit level with the subfloor. • Provide properly-dimensioned framing. Carefully unpack the whirlpool, remove the protective tape, and

KOHLER PRISTINE® BATH WHIRLPOOL FEATURES • 60" (152.4cm) x 42" (106.7cm) x 20-3/8" (51.8cm) • Cast iron with Safeguard9 slip-resistant finish • K-772-N1 - 2 hp variable speed pump with 1.5 kW heater, back-lit user control, and pulsating neckjets pillow • K-772-H2 - 1.5 hp variable speed pump with 1.5 kW heater, and back-lit user control • 6 Flexjets • UL Listed • LESS ALL TRIM CODES/STANDARDS APPLICABLE Specified model meets or exceeds the following: • ASME/ANSIA112.19.1M • ASME/A

Framing is of 2x4 construction. Make sure you allow for access to the pump in the event the unit requires service. When constructing the framing, allow for the thickness of sub and finished wall materials. If an apron wall without a ledge is desired, the finished apron wall surface must be 1/16” (2mm) under the bath rim. The whirlpool can be installed in a corner. Recess or sunken installations are also possible. Steps 1. through 3. below illustrate suggested stud construction. Modifications m

(680.4kg) Hot water supply should be 70% of capacity or greater. Installations will vary. 3-1/4" No change in measurements if connected with drain illustrated. (K-7161-AF or K-7161M-AF) Drop-in cut-out 58-1/2" (148.6cm) x 40-1/2" (102.9cm) Cut-out for undermount K-583 template Minimum access panel: Pump/control 34" (86.4cm) W x 15" (38.1cm) H required PUMP/CONTROL ACCESS PRODUCT DIAGRAM K-772-H2, K-772-N1 Pristine® Bath Whirlpool Page 2 of 2 1019471-4-A THE BOLD LOOK of KOHLER

ORDERING INFORMATION B. PRODUCT INFORMATION Accessories/hardware: Drain for drop-in K-7158 recommended Drain for free-standing K-7159 recommended Adjustable legs K-1172 optional Fixture*: basin area top area weight Bathing well 44” (111.8cm) x 24” (61cm) 60” (152.4cm) x 32” (81.3cm) 485 lbs. (220kg) water depth capacity Overflow 15” (38.1cm) 82 gals. (310L) * Approximate measurements for comparison only. Included Components: Cutout template 106594-7 C. INSTALLATION NOTE

Bath whirlpool shall be made of cast iron with Safeguard® finish. K-772-Nl bath whirlpool shall have 6 Flexjets, 2 hp variable speed pump, 1.5 kW heater, back-lit user control, and pulsating neckjets with pillow. K-772-H2 bath whirlpool shall have 6 Flexjets, 1.5 hp variable speed pump, 1.5 kW heater, and back-lit user control. Bath whirlpool shall be UL listed. Bath whirlpool shall be less all trim. Bath whirlpool shall be Kohler Model K-772- - . We reserve the right to make revisions with

(680.4kg) Hot water supply should be 70% of capacity or greater. Installations will vary. 3-1/4" No change in measurements if connected with drain illustrated. (K-7161-AF or K-7161M-AF) Drop-in cut-out 58-1/2" (148.6cm) x 40-1/2" (102.9cm) Cut-out for undermount K-583 template Minimum access panel: Pump/control 34" (86.4cm) W x 15" (38.1cm) H required PUMP/CONTROL ACCESS PRODUCT DIAGRAM K-772-H2, K-772-N1 Pristine® Bath Whirlpool Page 2 of 2 1019471-4-A THE BOLD LOOK of KOHLER

14 Terminelainstalaciondeconcreto ................................................... 14 Limpiezadespuesdelainstalacion ................................................... 14 Confirmeelfuncionamientocorrecto .................................................. 15 Secuenciadefuncionamiento ....................................................... 15 Procedimientospararesolverproblemas ............................................... 16 1019749-2-M Espanol-2 KohlerCo. Antes de comenzar AVISO:No levante