Blocked vents may cause damage to the projector. A R C H I T E C T S S P E C I F I C A T I O N S The PRS Series Clamp-Style Universal Projector Mount shall be a Peerless model and shall be located where indicated on the plans. It shall feature 25°(+5°/-20°) pitch, 20°(+10°) roll, 360° yaw (when attached to an extension column), and +/-15° yaw (when flush mounted). It shall have a 25 lb load capacity. It shall have a quick release spring loaded screw for easy removal and installation of the proje

TECHNICAL DATA SHEET - PRS Series Clamp-Style Universal Projector Mount Accessories: • Ceiling Plates (various models available) • Cord Wrap (ACC 852, 852S, 852W) • Fixed and Adjustable length Extension Columns, 1 1/2" NPT (“EXT” or “ADJ” models) • Fixed length Extension Columns, 3/4" NPT (“FLP” models) • Armor Lock Plus™ security cable with Lock (ACC 020) • Armor Lock Plus security cable (ACC 021) • Side to Side Adjuster (ACC 830) Dimensions: For product dimensions, see page 2. PRS SERIES PROJ

• Melrose Park, IL 60160 • (800) 865-2112 or (708) 865-8870 • Fax: (708) 865-2941 • NOTE: Read entire instruction sheet before you start installation and assembly. NOTE: Read entire instruction sheet before you start installation and assembly. • Do not begin to install your Peerless product until you have read and understood the instructions and warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please call Peerless customer ca

Features: • +5°/-20° Pitch, +/-10° Roll, 360° Yaw (when attached to an extension column), +/-15° Yaw (when flush mounted), which enables the image to be perfectly aligned with the screen • Mount completely pre-assembled to save you time • Independent roll, pitch, and yaw adjustments provide easy image alignment • Can be mounted directly to a single wood beam or concrete slab without disassembling the mount and without reinforcing the ceiling • Can attach to 1 1/2" extension column, 3/4" extensio

Before you begin, make sure all parts shown are included with your product. PWV240/BK PP740 Description Qty. Part # A wall mount assembly 1 095-0545-GB B concrete anchor 2 590-0320 C retaining spacer 4 590-5005 D 1/4-20 x 13 mm flat head phillips screw 2 520-1209 E M4 x 10 mm phillips screw 4 504-9012 F M4 x 20 mm phillips screw 4 504-9020 G M6 x 12 mm phillips screw 4 520-1128 H #14 x 63.5 mm flat head wood screw 2 520-1202 I M6 x 20 mm phillips screw 4 520-9402 J M6 x 30 mm phillips screw 4 51

13 of 33 ISSUED: 09-20-06 SHEET #: 202-9167-3 01-26-07 Visite el sitio Web de Peerless en Para el Servicio al cliente llame al 1-800-729-0307 o 708-865-8870 Visite el sitio Web de Peerless en Para el Servicio al cliente llame al 1-800-729-0307 o 708-865-8870 14 of 33 Espanol ISSUED: 09-20-06 SHEET #: 202-9167-3 01-26-07 Lista de las partes Negro Plateado Descripcion Cantidad # de parte # de parte AA placa de pared 1 201-1210 201-4210 BB soporte de inclinacion izquierdo 1 201-0181 201-0192 CC sop

No. 15-1186 To mount the TV FM Flush Mount Wall Plate: 1. If there is no wall box, cut a 13/4 ¥ 4 inch hole in the wall at the desired location. 2. Across the top of the hole, position a flat bracket piece against the inner wall surface and an angled bracket piece against the outer wall surface (with the recessed part inside the hole). (L) illus of hole on wall w./ dimension lines (R) illus of wall cross-sec: w/brackets and screws; size to fit text margins 3. Thread two of the supplied long

4.3 4" (102 mm) 4" (102 mm) La placa de pared (AA) se puede fijar a tres montantes que tengan 16" de separacion. Use un detector de montantes para localizar los bordes de los montantes. Es altamente recomendable el uso de un detector de montantes de “borde a borde”. Basado en los bordes, trace una linea vertical en el centro de cada montante. Coloque la placa de pared sobre la pared como modelo. Las ranuras superiores para montar deben estar 2.5" sobre lo que se quiere como centro de la pantalla

WIDTH (A) 12.75 (324) 16 (406) 20 (508) MAX. WIDTH (A) 2.5 (64) 3.75 (95) 5.25 (133) MIN. HEIGHT (B) 4.75 (121) 6.5 (165) 11 (279) MAX. HEIGHT (B) OUTSIDE DIMENSIONS / / / MIN / MAX MODEL # C PRS 35, PRS 35-S PRS 35-W PRS 40, PRS 40-S PRS 40-W PRS 45, PRS 45-S PRS 45-W 1.4 (36) 1.3 (33) 3.5 (90) 3.3 (84) 3.8 (97) 8.2 (208) PRS 35, PRS 35-S PRS 35-W PRS 40, PRS 40-S PRS 40-W PRS 45, PRS 45-S PRS 45-W 7.5 (191) 8.5 (216) 10.75 (273) 11.5 (292) 14.75 (375) 18.75 (476) 2 (51) 3.25 (83) 5.5 (140) 3.7

WARNING 1 3 2 B Drill holes and insert anchors (B). Place plate (A) over anchors (B) and secure with screws (H). Tighten all fasteners. A H B concrete surface 6 of 20 ISSUED: 02-05-09 SHEET #: 202-9312-1 M L N K N E G N Attaching Adapter Plate to Screen with VESA® 200 x 100 or 200 x 200 Mounting Pattern Attach hook bracket (M) to adapter plate (N) using four M5 x 6 mm screws (K) and #10 washers (L) as shown. 2 FOR VESA® 200 x 100 MOUNTING PATTERN: Choose hole pattern as shown below. Attach adapt