Cleaning Foreign Object Trap FLW2182NShock Sleeves Bolts and Lockwashers Motor Mount Hooked End of Shipping Brace Reinstallation of Shipping Materials To prevent damage while moving the unit, the shipping materials MUST be reinstalled. • Disconnect washer from electrical supply. • While supporting the front access panel, remove two screws from the bottom edge of the panel. • Gently lower the panel to remove it from the washer. • Place the shock sleeves on all four shock absorbers. Refer to the i

(10 mm) 0.38 in. (10 mm) .375 in. (10 mm) 0.38 in. (10 mm) .375 in. (10 mm) Number of steam inlets 1 1 1 1 1 Electrical Heating (Optional) Total electrical heating capacity 9 kW 9 kW 18 kW 18 kW 18 kW Electrical heating elements 3 3 6 6 6 Electrical heat element size 3 kW 3 kW 3 kW 3 kW 3kW 9001000 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 11 Specifications and Dimensions General Specifications Model 55 75 100 135 165 200 Overall Dimensions Overall width 35.4 in. (900 m

Some cleaning products may harm the finish on the control panel. Wipe the panel dry after cleaning. Wipe the washer cabinet as needed. If detergent, bleach or other washing products are spilled on the cabinet, wipe immediately. Some products will cause permanent damage if spilled on the cabinet. Do not use scouring pads or abrasive cleansers. The washtub will need no particular care though it may need rinsing or wiping after some unusual loads have been washed. This also may be necessary if too

(1194 mm) 24.4 in. (620 mm) 30.8 in. (782 mm) CFS468N 12.9 in. (328 mm) 10.4 in. (264 mm) 36.75 in. (934 mm) 37.8 in. (960 mm) 6.1 in. (155 mm) 35 in. (889 mm) 39.4 in. (1001 mm) 4.4 in. (112 mm) 15.5 in. (394 mm) 5 20 in. (508 mm) 38 in. (965 mm) 41 in. (1041 mm) 3.5 in. (89 mm) 1 3 2 4 8 7 9 10 6 25.16 in. (639 mm) 30.31 in. (770 mm) 8 in. (203 mm) 35 Pound Capacity Models with U in the 8th Position (e.g. *X35PVXU6) 46.3 in. (1176 mm) Figure 6 9001000 © Copyright, Alliance Laundry Systems LLC

Excessive laundry load. • Reduce the laundry load. What to do if... 37 Problem Cause possible/Solution The door will not open: The machine vibrates or is noisy: The programme is still running. • Wait until the end of washing cycle. The door lock has not been released. • Wait until the DOOR symbol disappears. There is water in the drum. • Select drain or spin programme to empty out the water. The transit bolts and packing have not been removed. • Check the correct installation of the appliance. T

If using liquid detergents, a programme without prewash must be selected. Your appliance incorporates a re-circulation system which allows an optimal use of the concentrated detergent. Follow the product manufacturer’s recommendations on quantities to use and do not exceed the «MAX» mark in the detergent dispenser drawer. GARMENT LABELS For drying, follow the indications given on the manufacturer’s labels: • = May be tumble dried • = Drying at high temperature • = Drying at reduced temperature •

El filtro se puede lavar o aspirar. Quite el exceso de agua del filtro sacudiendolo ligeramente. Esto quitara tierra y particulas atrapadas en el filtro. LA acumulacion de pelusas restringe la corriente de aire, que causa tiempos de secado mas largos. Despues de limpiar, vuelva a poner el filtro en su lugar. No use la secadora sin el filtro de pelusas. • No use ningun producto de limpieza tipo atomizador al limpiar el interior de la secadora. • Vapores toxicos o descargas electricas podrian ocur

F232157R7 August 2009 Table of Contents Safety Information.............................................................................. 3 Explanation of Safety Messages........................................................... 3 Important Safety Instructions ............................................................... 3 Safety Decals ........................................................................................ 5 Operator Safety.....................................................

Or, if washing towels or jeans on the DELICATE cycle, the lower speed extract would increase drying time. 1. Abort the current cycle by changing the cycle selector switch to the OFF position. 2. Restart the cycle from the beginning. Refer to the To Wash Clothes section. To Pump Out Water After Aborting Cycle Run a SPIN ONLY cycle. This cycle will perform a high speed extract operation that will pump all of the water out of the washer. Manual Soaking To soak a clothes load, start a wash in the de