(7) Remove TV stand support frame. (8) Remove the EMI Aluminum Foil Sheilding Tape from the LCD Panel (PIC1, 2) (9) EMI Aluminum Foil Sheilding Tape must be replaced during assembly. Remove the EMI Aluminum Foil Shielding Tape which secures the Keyboard wiring to the panel. (10) Remove from the D-sub board Speaker wire, Front/Side Control Button wire, and A/V wire connectors (PIC1) (11) Remove the black tape from the Speaker wire and Ceramic ring (PIC2) (12) Replace black tape during assembly. (

This symbol indicates important instructions accompanying the product. CA CACACACACA UTION UTIONUTIONUTIONUTIONUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. When servicing use only identical replacement parts. Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. Impor

154-501-GF370-AH Front/Side Control Button Cover Silver 899-E00-GF271XAH IR Board 899-A00-GF271XAH Front/Side A/V Input Bd. A3 *705-532-050A-V5H 32" LCD Panel (AUO V5) 00, 01, 02, 06 *705-532-050C-4AH 32" LCD Panel (CMO L01) C3 *705-532-001QTH 32" LCD Panel (QDI) (F1) C3 *705-132-HA32H 32" LCD Panel (QDI) (F2) 00, 01, 02, 06 *151-103-FPH8BH Front Bezel Black/Silver (CMO L01) A3 *151-000-FPH8BEH Front Bezel Black/Silver (AUO V5) C3 *151-110-FPH8BEH Front Bezel Black/Silver (QDI) 151-002-FPH7GH Re

If you still have questions, call our toll-free customer service number at 1-866-286-5168. Safety Instructions To ensure proper use of this product, please read this user’s manual carefully and save for future reference. This manual provides information regarding the use and maintenance of your DVD recorder. About the ..symbol If the “..” symbol appears on your TV display during operation, the function you are trying to use is not available. Danger symbol: The lightening flash with arrowhead sym

Table of Contents 1. Operation.......................................................................................................................................6 2. Troubleshooting / Flow Charts.......................................................................................................14 3. Polaroid Display Cell Defect Specification........................................................................................18 4. Before Returning This Product to the User...............

These defective cells can be categorized into two types; (1) Non-lighting or dark cell defect: defect in which the cell is always off (2) Non-extinguishing or bright cell defect: defect in which the cell is always on The Polaroid Display Cell Defect Specifications below define the allowed limits for display cell defects and are used as the criteria in determining whether an LCD panel is replaced. 7 or more defective pixels across the entire LCD screen Polaroid will repair (replace LCD panel) or

215E Polaview LCD Projector User’s Guide Table of contents General information Declaration of Conformity ____________________________________________6 Important safeguards_________________________________________________7 Introduction LCD projector features______________________________________________10 Contents of the LCD projector box____________________________________12 Parts list and accessories _____________________________________________13 Remote control unit ___________________________

. All the safety and operating instructions should be read before the equipment is operated. • Keep these instructions. The safety and operating instructions should be retained for future reference. • Heed all warnings. All warnings on the equipment and in the operating instructions should be adhered to. • Follow all instructions. All operating and use instructions should be followed. • Do not use this unit near water. For example, near a bathtub, sink, laundry tub, in a wet basement, or a swimm

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. This symbol indicates "dangerous voltage" This symbol indicates important inside the product that presents a risk of instructions accompanying the

(2) The control button board is attached with glue. Use alcohol to soften the glue and remove the control button board (PIC1). (3) Replace control button board and use glue to fasten to front bezel. Note: Before returning this product to the end user, you must follow the steps outlined in the section, Before Returning This Product to the User, on page 19. This procedure ensures that the chassis will not cause electric shock. PIC1 6. Spare Parts Lists – FLM-Series 26, 32, 37 Attention Service Cen