Use of any other kind of accessory is not recommended. Replacement parts can be ordered from or from your retailer. 17. Do not use AeroGarden for other than intended purpose. 18. This product is intended for household and residential use only. This product is not approved for commercial applications. 19. Read and follow all important notices on the AeroGarden and in the accompanying literature. 20. If supply cord is damaged, it must be replaced by manufacturer, its service agent, or similarly qu

Press Bio-Dome down until its rim almost touches Grow Surface. Bio-Dome Record Planting Date Record the date you planted your AeroGarden on the front cover of the Guide that came with your Seed/Plant Kit. Add 2 tablets from “Starting Nutrients” bag directly into Bowl. See "Add Nutrients" (Feed Garden - Basic Feeding) on page 10 of this guide for additional feeding instructions. note: do not remove Bio-domes until seeds have sprouted. neVer reMoVe SEED POD LABELS. 3 Starting Your Garden 3 Startin

remember: Grow Bulbs should be replaced every 6 months – order replacement bulbs at or from your retailer. • Remove Bio-domes When plants appear through the hole in Seed Pod Labels, remove Bio-Domes and discard or recycle. noTe: never remove Seed Pod Labels. Basic Reminders About Your AeroGarden (continued) Raise lamp Hood (lights) As plants grow to 1-2” from lights, raise Lamp Arm one Locking Button at a time. Be sure Lamp Arm is set on the lowest Locking Button when you start your AeroGarden.

With other hand, support Lamp Hood and use thumb to push in Locking Button. Release Locking Button while pulling up on Lamp Arm. Locking Button will automatically click into next notch. Replace Bowl on Base and plug in AeroGarden 3. 2 1 3 5 4 Raise lamp Hood (light) As plants grow to 1-2” from light, raise Lamp Hood one notch at a time. Be sure Lamp Arm is in the lowest position when starting your AeroGarden 3. note: When lowering Lamp Hood, be sure to hold Lamp Arm to avoid crushing plants. Bas

Bulbs can be ordered at or from your retailer. After replacing Grow Bulbs, press “Reset” button to restart grow bulb timer and turn off flashing light. noTe: If you store your AeroGarden 6 between uses, grow bulb timer automatically stops when Garden is unplugged. †See complete replacement instructions on next page. • Lights On/Off Use to occasionally override built-in light timer. Once pushed, lights will stay off/on until the next time built-in light timer is set to go on/off. This will not af

Near: A standard electrical outlet, per local regulations Under: A space that allows 35” (89cm) clearance for the full height of raised lamp On: A sturdy, water- tolerant surface (Metal surfaces may cause noise due to vibration) In: A 60-75°F (16-24°C) environment (optimal) Place Your Garden h 68°F/20°C 2 Planting Your Garden 2 Planting Your Garden Genovese Basil (Sprouts in 3-7 days) Tall Plan Your Garden Layout B Add Water Using a Spouted Container A Lift View door Fill to “Fill To Here” (loca

If you no longer have your model’s Quick Start Guide, you can obtain the latest version at IntroductIon IntroductIon Each Master Gardener Kit is designed for AeroGardeners who want to plant their own seeds or root their own cuttings Each kit includes the supplies needed to plant and grow one to three custom gardens While the AeroGarden provides the ideal environment for growing plants, there are many decisions you need to make that will impact the outcome of your garden This Guide will assist yo

CAUTION - Grow Bulbs may be hot! [3 Turn AeroGarden around so the back is facing you. Press in on Locking Tab 1 located on Lamp Hood vent. At the same time, use other hand to push up on silver ring (where Lamp Hood attaches to Lamp Arm). Locking Tab 1 To install Lamp Hood: j| Push Lamp Cord firmly into socket in new Lamp Hood. ^2| Center hands over Lamp Arm and push Lamp Hood down until you hear a "click.” ^3 Insert Grow Bulbs; return Bowl to Base; and plug in AeroGarden. Refer to your

As bulbs dim, plants may “stretch” looking for light, or not flower or fruit as vigorously. • We are always introducing new Seed Kits! Check our website to see what you want to grow next. Replanting your AeroGardenTM If you have already grown a seed kit in your AeroGarden, it is important to restart the nutrient timer before planting a new seed kit. For 6- and 7-Pod AeroGarden models: 1. Press and HOLD “Reset” button until “Add Nutrients” light begins to blink: • 6 seconds/Space•Saver 6 models •

Empty contents of Bowl in sink. Remove Seed Pods and plants from Grow Surface. • Pull Seed Pods out of Grow Surface openings. • Throw away Seed Pods and plant debris (plant growth and roots). If you compost, plant debris can be composted. Rinse and clean Grow Surface, Pump Stand and Pump Filter*. • Use a soft scrub brush to clean tangled roots from underside of Grow Surface and Pump Stand. • Remove Pump Filter from Pump Stand. Gently scrub roots from Pump Filter. • Place Pump Filter back into Pu