If unit is damaged or parts are missing, notify your Absocold dealer at once. INSTALLATION REQUIREMENTS Remove all packing material and tape. Install on a level floor or well-supported counter. Avoid any direct sunlight, heat source, or moisture. This refrigerator is designed to be freestanding — that is, the appliance is to be installed at least 1.” from the wall and the cabinet bottom is at least .” to 1” above the floor or carpet, in order to let the air circulate freely around the refrigerat

Readjust the feet. Move the appliance slightly. The compressor starts after a period of time. See the "Cleaning and Care" section. If after all these checks your appliance does correctly, contact your local AEG Service Force Centre. Please note that it will be necessary to proof of purchase for any in- guarantee service calls. In-guarantee customers should ensure that the above checks have been made as the engineer will make if the fault is not a mechanical electrical breakdown. Energy Saving Ti

GENERAL INFORMATION ......................................................................................................11 • CHANGING AIR FLOW DIRECTION • AIR FLOW AROUND UNIT • DRAIN HOLE AND WATER DRIPPING OUTSIDE 6. CARE AND MAINTENANCE ....................................................................................................12 • AIR FILTER • CLEANING THE AIR CONDITIONER 7. ELECTRICAL REQUIREMENTS ....................................................................................

The main supply and return lines to/from the HRV must be 6 inches (150 mm) minimum. Branch lines to the individual rooms may be as small as 4 inches (100 mm), but 5 inch (125 mm) lines are preferred.If the floor is the only option available, then special care should be taken in locating grilles. Areas such as under baseboard heaters will help to temper the air. Also optional inline duct heaters are available for mounting in the supply duct work to add heat if required.In homes with a forced air

Instant mount models are designed for Windows 27.5 inch (699mm) to 36 inch (914mm) wide. 3. Mark the center of Window sill with pencil. 4. Insert Screws (Type A) into the sill bracket. 5. Attach Sill bracket to window sill using two Screws (Type B) by each bracket. The outside edge of window bracket should be 11.8 inch (300mm) from center line. 6. Adjust Screw (Type A) so that Sill Bracket have a slight tilt by using carpenter's level meter. Window Shutter (2 pieces) Window kit FrameLeft side (1

Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the children. Handicapped or children without care shall not use the machine. Do not put any hot or heavy items ( such as the kettle with hot water ) on the washing machine. Do not decompose, repair or alter the machine by yourself. Keep the machine away from direct sunlight and heat source like the heater. Do not wash laundries with volatile materials (such as thinner, petrol etc.).

Disconnect power cord by grasping the plug, not the cord. 20. Replace worn power cord and/or loose plugs. 21. To reduce the risk of electric shock or fire, do not use extension cords or adapters to connect dryer electrical power source. SAVE THESE INSTRUCTIONS DANGER Risk of child entrapment. Before you throw away your old dryer, take off the door so that children may not get trapped inside. Thank you for using our Haier product. This easy-to-use manual Model number will guide you in getting the

Remember the settings that work best to get ideal drying results. The COOL DOWN period at the end of each cycle provides items a chance to tumble with no heat and cool down to room temperature. This prevents wrinkles from setting if items cannot be cared for immediately. The ENERGY SAVER/DAMP DRY settings, marked with a dot (•), show which settings will use the least energy and will leave items damp for easier ironing. NOTE: The timer knob will not advance as quickly in the AUTOMATIC cycles a

They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance. These operating instructions are for use with several technically comparable models with varying accessories. Please observe the notes which apply to your model. Notes which are important for your safety or for the proper functioning of the appliance are stressed with a warning triangl