Fitting the Blade and Fan 1. Ensure the fan is located correctly.(T) 2. Fit the blade to the fan with the sharp edges of the blade pointing away from the fan. 3. Re-assemble blade bolt through blade and fan. 4. Hold the fan firmly and tighten blade bolt firmly with the spanner provided. Do not over tighten. 5. Do not use a longer spanner. T blade blade bolt fan Fault Finding Hints Caring for your Lawnmower Cleaning (U) • USE GLOVES • IMPORTANT It is very important that you keep your lawnmower cl

The operator is responsible for following the warning and safety instructions in this manual and on the Hedgetrimmer. Explanation of Symbols on the HT39, HT42, HT42s, HT45s, HT53s Warning. Read the user instructions carefully to make sure you understand all the con- trols and what they do. Switch off! Remove plug from mains before adjusting, cleaning or if cable is entangled or damaged. Keep the cable away from the blade. Do not use in the rain or leave the Hedgetrimmer outdoors while raining. T

Do not let cable lay or trail through pools of water or splashed with water from hose pipes. MAINS PLUG REPLACEMENT IMPORTANT • If the plug supplied is cut off it should be destroyed. There is an electric shock hazard if a cut off plug is inserted into a 13 amp socket. 1. No earth required. Our products are double insulated to EN50144 and under no circumstances should an earth be connected to any part of the product. 2. Ensure the mains voltage suits your product 3. IMPORTANT! The wires in the m

Removing and Fitting the Blade and Fan (Q) Q blade blade bolt fan pulley Always handle the blade with care - sharp edges could cause injury. USE GLOVES. Removing the Blade and Fan 1. To remove the blade bolt, hold the fan firmly and, with the spanner provided, loosen the blade bolt by turning it anti-clockwise. 2. Remove the blade bolt, blade and fan from the pulley. 3. Inspect for damage and clean as necessary. Renew your metal blade after 50 hours mowing or 2 years whichever is the sooner - re

The operator is responsible for following the warning and safety instructions in this manual and on the lawnmower. Never use the mower unless the grassbox or guards provided by the manufacturer are in the correct position. Explanation of Symbols on the RE320/RE32/R32 Warning Read the user instructions carefully to make sure you understand all the controls and what they do. Always keep the lawnmower on the ground when mowing. Tilting or lifting the lawnmower may cause stones to be thrown out Keep

Desconectar! Sacar el enchufe del suministro antes de hacer ajustes, limpieza o si el cable se enreda o se dana. Mantener el cable fuera de alcance de la hoja. Peligro, cuchillas rotativas. Mantenga las manos alejadas de las aberturas de la maquina cuando este funcionando. Las cuchillas rotativas continuan girando despues de parar la maquina. Espere a que todos los componentes de la maquina se hayan parado completamente antes de tocarlos. No segar si llueve o no dejar la segadora a la intemperie

Turbo Lite 330/350 Turbo 400 Turbo Lite 330/350 Turbo 400 GB HU D F NL N SF IMPORTANT INFORMATION Read before use and retain for future reference WICHTIGE INFORMATION Bitte vor dem Benutzen des Gerates durchlesen und gut aufbewahren RENSEIGNEMENTS IMPORTANTS A lire avant usage et a conserver pour reference ulterieure BELANGRIJKE INFORMATIE Leest u deze informatie voor het gebruik en bewaar ze voor toekomstige raadpleging VIKTIG INFORMASJON Les bruksanvisningen noye for bruk og oppbevar den for s

Deberá seguir con cuidado las instrucciones de aviso y seguridad para asegurar una seguridad razonable y la eficiencia de funcionamiento de su aparato. El operario es responsable de seguir las instrucciones de aviso y de seguridad en este manual y en el aparato. Explicación de los símbolos en su aparato Lea las instrucciones del usuario con atención para asegurarse de que comprende todos los controles y para qué sirven Mantenga a los curiosos alejados. No opere la máquina mientras haya alguie

England. Autres directives.........................98/37/EEC, 89/336/EEC, 73/23/EEC et aux normes............................EN61000-3-2, EN61000-3-3, EN55014-1, EN55014-2, EN774, EN50144-1, EN50144-2-15 Type...................................................... Watts..................................................... Niveau garanti de puissance sonore.... Niveau mesuré de puissance sonore... Niviviu.................................................. Valeur..............................

b) Se provea prueba de compra. c) El fallo no es el resultado de maltrato, descuido o mal ajuste por el usuario. d) El fallo no haya ocurrido por uso y desgaste normal. e) La maquina no haya tenido reparaciones o servicio, desmantelaje o interferencia por personas sin la autorizacion de Husqvarna UK Ltd.. f) La maquina no haya tenido uso de alquiler. g) La maquina es la propiedad del comprador original. h) La maquina no haya tenido uso comercial. * Esta garantia es adicional a, y de ninguna man-