.Water Seal: A two part “face” seal, the top half rotating with the auger, the bottom half stationary, the sealing action being where the two “faces” meet. .Ice Sweep: A plastic cap with “fingers”. It revolves with the auger to “sweep” the ice into the ice chute. .Breaker (Divider): Where the ice is compressed and much of the extra water is squeezed out of it before it is discharged into the bin. .Motor: A split phase motor that drives the gear reducer. .Thrust Bearings: As the ice is pushed up

See page F9 for adjustment procedure. Purge When the machine enters the harvest cycle the water pump continues to run and the purge valve opens. This allows mineral laden water to be pumped from the trough to the drain. This helps keep the water system clean. On dual evaporator models beginning March 1998, the water pump and purge valve remain energized during the entire harvest cycle. All other machines, the water pump and purge valve de-energize once water is flushed from the trough. The len

Our equipment features ideal solutions for hard water, food safety concerns and tight spaces E x C E l l E n C E since our beginnings in 195 , we have sold more than 1,000,000 ICE Makers and storage Bins worldwide and have achieved world class quality levels r E l I A B I l I t y ICE-O-Matic is backed by the technological resources of our parent company Enodis Corporation, one of the world’s largest food equipment manufacturers E x P E r I E n C E For whatever ICE making needs you may have, ICE-

ISO 9001 Certified ICE1406/ 1405/ 1407 Cube Ice Maker 11100 E. 45th Avenue Phone: 303. 371.3737 Rev: A-05/08 Denver, CO 80239 Fax: 303. 371.6296 Part: 1012 ICE_Cubers.indd 18 5/8/08 11:22:20 AM ™ ® Ice-O-Matic Air Cooled Please note: air-cooled units require 6. (152 mm) clearance for air intake and exhaust. Ice maker potable water in, 3/8" FPT.A. Ice maker water out, 3/4" FPT.B. Hole for electrical connections, 7/8".C. Electrical Junction Boxd. Air In– Rear Standard Side Discharge Standard Side

If, at any time, you encounter conditions that are not addressed in this manual, call, E-mail or write the ICE-OMatic Service Department: ICE-O-Matic 11100 E. 45th Ave. Denver, Co. 80239 Attn: Technical Service Department E-Mail: Tech.service@iceomatic.com Telephone Numbers Any Service communication must include: 800-423-3367 All Departments • Model Number 888-349-4423 Technical Assistance Only • Serial number 303-371-3737 • A detailed explanation of the problem Keep this manual for future refer

The CD10022, CD10522, CD20030 and CD20530 are Ice-O-Matics brand hotel/motel ice dispenser. The CD10022 is designed to use a Ice-O-Matic model GC300, 550, ECP 400, 550, 556 ice machine as the source for ice. The CD-200-30 is designed to use a Ice-O-Matic model ICE 250, 400, 500 and 600 ice machine as the source of ice. Ice from the cuber falls into the insulated hopper, where it is stored until needed. When a user pushes the dispense button, a rotating wheel scoops the ice up and moves the ice t