/ 0 () 0 • Run black (live), white (neutral), and green (earth) wires (#14 AWG) according to the National Electrical Code or CSA Standards and local codes and ordinances in 1/2” conduit from power supply to j-box. • Connect black, white, and green wires from power supply to black, white, and green/yellow wires in j-box respectively. • These connections should be done always making reference to the electrical diagram found inside the hood. • Close j-box cover and reapply screws. Mounting th

These hoods are specially conceived for combi steamers. The models detailed on this sheet are 4 hoods for 6 and 10 GN 1/1 and 10 GN 2/1 combi steamers, available in static or ventilated version. HOODS FOR COMBI STEAMERS ZANUSSI PROFESSIONAL FUNCTIONAL AND CONSTRUCTION FEATURES ♦ Built in AISI 304 stainless steel. ♦ Static models:they have to be connected through canalization to a remote extractor. ♦ On model with built-in fan, a built-in humidity sensor automatically activates the venti

¦ Down draught extractor ¦ Touch controls with LED display ¦ Touch controls ¦ Variable 4 speed control including ¦ Variable 4 speed control including 1 intensive setting 1 intensive setting ¦ Delayed switch off timer and auto safety ¦ 2 heights of operation, fully retracts to switch off worktop level when not in use ¦ Delayed switch off timer and auto safety switch off PERFORMANCE 480m3/h extraction rate 65dB(A) noise level Extraction and recirculation Removes grease and odours directly from the

Cleaning the hood • Clean the outside of the hood using a damp cloth and a mild detergent. • Never use corrosive, abrasive or flammable cleaning products. • Never insert pointed objects in the motor’s protective grid. • Wash the outside surfaces using a delicate detergent solution. Never use caustic detergents or abrasive brushes or powders. • Only ever clean the switch panel and filter grille using a damp cloth and delicate detergents. • It is extremely important to clean the unit and change th

• If the hood is used in its filtering function, it will operate simply and safely in the above conditions without the need for any of the aforementioned measures. • When the hood is used in its extractor function, the following rules must be followed to obtain optimal operation: — short and straight outlet hose — keep bends in outlet hose to a minimum — never install the hoses with an acute angle, they must always follow a gentle curve. — keep the hose as large as possible (preferably the same

O No deje que las manchas se acumulen durante mucho tiempo. O No use utensilios o cepillos de acero. Pequenas particulas de acero pueden adherirse y oxidarse. O No use soluciones salinas, desinfectantes, lejias, o productos de limpieza que permanezcan en contacto con el acero inoxidable durante largos periodos de tiempo. Muchos de estos productos contienen componentes quimicos que podrian resultar nocivos. Aclare con agua y seque con un pano limpio. Las superficies lacadas deben limpiarse solame