Mac Users - Download the Mac OS Setup Wizard. Open the SetupWizard file and launch the application. After about 20-30 seconds, the Setup Wizard will open, which will guide you step-by-step through the installation process from connecting your hardware to configuring your camera and registering it with your mydlink account. ENGLISH Start mydlink Open a web browser on any computer connected to the Internet. Enter in the address bar and press Enter. Sign in with your mydlink account registered in t

Usually this will be a server owned by the ISP. Get this IP address from your ISP. This is the second choice for a DNS server. Get this IP address from your ISP. The Maximum Transmission Unit size may be changed if you want to optimize efficiency for uploading data through the WAN interface. The default setting (1400 bytes) should be suitable for most users. Some user may want to adjust the setting to optimize performance for wireless traffic or when low latency is desired (such as with Internet

Options to configure are Year, Month, Day, Hour, Minute, and Second. Click on the Save Settings button to accept the changes made. Click on the Don’t Save Settings button to discard the changes made. Syslog The Syslog options allow you to send log information to a System Log Server. The following parameters will be available for configuration: Enable Logging Tick this option to enable the Syslog feature. To SysLog Server: Syslog Server IP Enter the Syslog Server IP address used here. Address: Cl

Local Cable Network Service Before installing the cable modem, contact your local cable check the availability of Internet/Cable network access. Read Guide thoroughly before attempting to install the cable modem. Check Your Package Contents These are the items included with your DCM-202 purchase: D-Link Cable Modem DCM-202 CD-ROM (containing USB Drivers, Manual, and Warranty) Ethernet (CAT5 UTP/Straight-Through) Cable USB Cable 12V DC, 1A Power Adapter Device Stand If any of the above items are

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. D-Link Computer Corporation disclaims any proprietary interest in trademarks and trade names other than its own. COPYRIGHT STATEMENT Information in this document is subject to change without notice. © 2006 D-Link Computer Corporation. All rights reserved. No part of this publication may be reproduced in any form or by any means or used to make any derivati

The VGA Progressive CMOS sensor in the DCS-6110 delivers exceptional picture quality and, with the built-in Samba client, images can be captured and transferred to a NAS or other network storage device. Equipped with PoE support7, the DCS-6110 can receive both power and data over a single Ethernet cable, allowing you to place this camera in locations without a power outlet. The DCS-6110 is a fixed dome solution that makes monitoring discreet and protects against tampering, added with the ability

01 (Sep. 2000) FCC Certifications This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is

• DMP-210/220 Player • Drivers and Software on CD-ROM • Earphone • USB Cable • User’s Manual • Quick Install Guide • 1 x AA Alkaline Battery Driver and Manager Installation The driver enables the Manager software to communicate with the DMP-210/220. When you install the Manager software, the drivers will automatically be copied to the Windows system directory. ! Note: Install the Manager program before connecting your DMP-210/220 to the USB port. The Manager program loads the appropriate drivers