Brands and product names are trademarks or registered trademarks of their respective companies. The vendor makes no representations or warranties with respect to the contents herein and especially disclaim any implied warranties of merchantability or fitness for any purpose. Further the vendor reserves the right to revise this publication and to make changes to the contents herein without obligation to notify any party beforehand. Duplication of this publication, in part or in whole, is not allo

The AGP protection function is to protect the mainboard and AGP cards if a non 1.5V card is installed. I/O facilities: • One multi-mode Parallel Port capable of supporting the following specifications: 1. Standard & Bi-direction Parallel Port 2. Enhanced Parallel Port (EPP) 3. Extended Capabilities Port (ECP) • Supports two serial ports, 16550 UART • Supports Infrared Data Transmission using IrDA • Supports PS/2 mouse and PS/2 keyboard • Supports 360 KB, 720 KB, 1.2 MB, 1.44 MB, and 2.88 MB flop

Solutions: 1. Make sure power cable is securely plugged in. 2. Replace cable. 3.Contact technical support. 4.Use different socket, repair outlet, reset circuit breaker or replace fuse. Problem 2: System inoperative. Keyboard lights are on, power indicator lights are lit, hard drive is active but system seems “hung” Causes: Memory DIMM is partially dislodged from the slot on the mainboard. Solutions: 1. Power Down 2. Using even pressure on both ends of the DIMM, press down firmly until the module

a I bat ron com. tw External Multi-Touch Module EM215 Contents Hardware Installation..........................................................................3 Driver Installation - Windows 7..............................................................5 Driver Installation - Windows XP/ Vista...................................................6 Accessories......................................................................................9 2 Hardware Installation : (a)To install the

CCD Caption control. 17 10. ACCESSING THE MAIN MENU Access the OSD Menu by control panel on the monitor or the remote control to make the operation. Screen-1 Screen-2 Screen-3 Screen-4 Screen-5 Screen-6 Screen-7 Screen-8 Screen-9 OSD FUNCTION CHART 18 Following lists the function keys on the OSD: Note: .. • Press the Menu button on the control panel or the remote control to display the main menu. .. • Press the SEL +/- buttons on the control panel or remote control to scroll through the menu. ..

1 2. SAFETY INSTRUCTIONS..................................................................... 2 3. README FIRST.................................................................................... 4 4. WITHOUT VISION CONVERTER......................................................... 6 5. WITH . CT-1871. VISION CONVERTER ............................................ 7 6. WITH . CT-1890. CT-1892 . VISION CONVERTER.................................... 8 7. INSTALLATION ................................