J Provide for sufficient ventilation when working plastics, varnishes and paints. J Do not soak materials or surfaces to be worked with liquids containing solvents. The heat generated during sanding can give rise to vapours that are toxic or hazardous to health. J Avoid sanding lead-based paints or other materials that are hazardous to health. J Material containing asbestos may not be worked. Asbestos is considered to be a carcinogen. J Avoid contact with the moving sanding sheet. J Use the appl

Workplace safety .....................................................................................................Page 7 2.Electrical safety.........................................................................................................Page 7 3. Personal safety..........................................................................................................Page 8 4. Careful handling and use of electrical power tools................................................Page 8 Safet

The use of ancillaries and accessories other than those recommended in the operating instructions could lead to an increased risk of personal injury for you. Q Before first use Q Charging the rechargeable battery on the device (see Fig. D) note: The battery is supplied partially charged. Charge the battery for at least three hours before first use. You can charge the Li-Ion battery at any time without risk of shortening battery life. Interrupting the charging process does not damage the battery.

4. Careful handling and use of electrical power tools a) Do not overload the device. Always use an electrical power tool that is intended for the task you are undertaking. By using the right electrical power tool for the job you will work more safely and achieve a better result. 8 GB General safety advice for electrical power tools b) Do not use an electrical power tool if its switch is defective. An electrical power tool that can no longer be switched on and off is dangerous and must be repaire

Avant de lire le mode d‘emploi, ouvrez la page contenant les illustrations et familiarisez-vous ensuite avec toutes les fonctions de l‘appareil. Prima di leggere aprire la pagina con le immagini e prendere confidenza con le diverse funzioni dell’apparecchio. Vouw voor het lezen de pagina met de afbeeldingen open en maak u vertrouwd met alle functies van het apparaat. Antes de comecar a ler abra na pagina com as imagens e, de seguida, familiarize-se com todas as funcoes do aparelho. X18VKomperna.

To help you do this please read the accompanying operating instructions. Keep these instructions in a safe place. If you pass the device on to anyone else, please ensure that you also pass on all the documentation. • Proper use The device is intended for the dry cutting, rough grinding and brushing of metal and stone. Any other use or modification to the device shall be considered as improper use and could give rise to considerable dangers. We will not accept liability for loss or damage arisi

It can be prevented by taking the appropriate precautions as described below. a) Maintain a firm grip on the electrical power tool and position your body and arms to allow you to resist kickback forces. Always use the auxiliary handle, if provided, to exercise the greatest possible control over kickback forces or reaction torques as the device builds up to full speed. By taking 10 GB/IE III PARKSIDE General safety advice for electrical power tools suitable precautions the operator can contr

An accessory rotating faster than its permitted speed could disintegrate or fly off. e) The external diameter and the thickness of the attachment must be compatible with the dimensions of your electrical power tool. Attachments that are not dimensionally compatible cannot be adequately guarded or controlled. f) Grinding discs, flanges, grinding wheels or other accessories must fit exactly on to the spindle of your electrical power tool. Attachments that do not exactly fit on the spindle turn u

For this reason, always make sure that nobody is placed in any danger and that there are no inflammable materials near the working area. ■ Q Warning! noxious fumes! Any harmful / noxious dusts generated from sanding represent a risk to the health of the person operating the device and to anyone near the work area. UJwARNI nG|bUBThAbA03! When sanding wood and in particular when working on materials that give rise to dusts that are hazardous to health, the sander must be connected to a suita

The use of tools and accessories other than those recommended in the operating instructions could lead to an increased risk of personal injury for you. Q Operation Q Operation Take note of the mains voltage! The voltage must agree with the information on the type plate of the appliance (appliances that are designated as 230 V can also be connected to 220 V). Q Switching On and Off Switching on intermittent function: j Press the ON/OFF switch 1 . Switching off intermittent function: j Release the