After 5 minutes, the alarm sound will automatically resume. 10. CLOCK: This quartz analog clock features a fine mechanical quartz movement for superb accuracy. The clock operates off of a single “AA” battery so power failures will not affect the clock’s accuracy. Check the battery annually so the clock remains accurate. The clock’s illumination cannot be turned off or adjusted. It is normal for the light to take several seconds to extinguish if the power supply is disconnected. Tivoli Audio32671

NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. IMPORTANT SAFETY INSTRUCTIONS READ INST

9. SNOOZE (parte superior de la radio): Cuando suena el despertador, presionar por algunos segundos el pulsador ubicado en la parte superior de la radio, con lo cual se logra que el despertador deje de sonar por 5 minutos; despues de ese periodo reanudara a sonar. 10. AJUSTE DEL RELOJ: El reloj analogico esta provisto de un mecanismo de cuarzo que brinda una precision excepcional. El reloj funciona por medio de una bateria “AA” de modo que incluso cuando haya una merma de la tension de red no se

Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. For example, do not use near a bathtub, in a wet basement, near a swimming pool, and the like. WARNING! Do not expose this product to rain or moisture. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amp

The power supply connector is 5.5mm/2.1mm x 13mm long, center positive. Do not connect the power supply to an electrical outlet controlled by a wall switch. It is normal for the power supply to become warm during use. An optional 12VDC nominal, 1.5A fused source may also be used. 3. TIME SET: Briefly press and release this button to advance the hands in small increments. Press and hold this button to continuously advance the clock’s hands. Release the button when the clock is set properly. Be su