Convenient stay cool handle on head for positioning. 3-diopter glass lens provides 1.75x magnification. Removable protective lens cover makes this magnifier lamp usable as a table lamp. Takes one T5 22w daylight simulation bulb (included). Includes heavy-duty desktop mounting clamp that fits up to 2." thick surfaces. All metal construction. UL listed. No. ML255-B ML255-D ML255-BULB Color Black White Replacement bulb SRP $89.95 ea 89.95 ea 6.95 ea ALVIN® Trim Design Magnifier Lamp Perfect for pre

Order posters today! Refer to item numbers listed on right when ordering. • Posters are 18" x 24" • Limit one printed poster per item per store location • Available free of charge to Alvin dealers • PDF files are available for download from for in-store or electronic presentation to consumersFurniture Sales Tools Floor Sample Program Nothing sells furniture better than samples on your showroom floor. Increase your furniture sales with a floor sample of one of these fine tables. Please inquire fo

Acrylic edges are elevated to prevent ink smears and steel ball-bearing pulleys provide smooth movement. Comes with all mounting hardware and installation instructions. No. Length SRP 1101-30 30" $139.00 ea 1101-36 36" 146.00 ea 1101-42 42" 159.00 ea 1101-48 48" 167.00 ea 1101-60 60" 189.00 ea ALVIN® Paral-Liner Delux Mobile Parallel Straightedge Deluxe version of the popular Paral-Liner Series, with an integral comfort grip bar to control straightedge movement. The brushed aluminum surface resi

Warp-free white Melamine® tabletop. Base comes in white or black finish. No. Description (Base, Size, Top) Weight SRP s EN42-3 Black 31" x 42" White 97 lbs. $1250.00 ea s EN42-4 White 31" x 42" White 97 lbs. 1250.00 ea s EN48-3 Black 36" x 48" White 109 lbs. 1275.00 ea s EN48-4 White 36" x 48" White 109 lbs. 1275.00 ea s ENB-3 Black base only 68 lbs. 1180.00 ea s ENB-4 White base only 68 lbs. 1180.00 ea Ensign5 Year Warranty ALVIN® Workcenter This adjustable table is a lower height version of ou

Pay close attention to correct orientation of left and right hinges. Tighten securely. Insert tilt adjustment rods (F) into threaded barrels on each side frame. Screw adjustment knobs (E) into threaded barrels on each side frame. Set adjustment rods so that connecting brackets are about 2" above side frames for the time being with rods facing straight up and down and rear mounting brackets facing out, as shown in diagram. Tighten knobs securely. Base frame assembly is now complete. Set aside.

Use care not to drill all the way through the tabletop. ^5 Attach front hinges and rear brackets to tabletop using %" Phillips screws (I). Tighten securely but use care not to over tighten and strip. ©2008 ALVIN & COMPANY, INC. • P.O. Box 188, Windsor, CT 06095-0722 WWW.alvinCO.COm Phone: 860-243-8991 • Toll-Free: 800-444-2584 • Fax: 860-242-8037 • Toll-Free Fax: 800-777-2896 lit-abiss 7/qb

Hinges should also be centered evenly between left and right sides of tabletop. ^3 Adjust and position rear mounting brackets so they are 19/" from the front edge of the table top and centered evenly between left and right sides, as shown in diagram. Brackets should sit flush on the tabletop surface with the rods facing straight up and down. ^4 Mark locations of all 12 holes with a dark pencil or marker and then use an awl or drill with 1/i6" bit to make starter holes. Use care not to drill al

Use care to differentiate rear crossbar (B) (341/2" long) from footrest crossbar (C) (351/2" long). Attach both rear crossbars (B) and the footrest and support crossbars (C) to one side frame (A) using 2" Allen bolts (H). Tighten securely. Note: Threaded barrels preattached to leg frames must be in rear and facing out. Attach other side frame (A) to opposite ends of crossbars in step two using 2" Allen bolts (H). Tighten securely. Place dust cover (D) over top of base frame and attach using %

Use care to differentiate rear crossbar (B) (341/2" long) from footrest crossbar (C) (351/2" long). Attach both rear crossbars (B) and the footrest and support crossbars (C) to one side frame (A) using 2" Allen bolts (H). Tighten securely. Note: Threaded barrels preattached to leg frames must be in rear and facing out. Attach other side frame (A) to opposite ends of crossbars in step two using 2" Allen bolts (H). Tighten securely. Place dust cover (D) over top of base frame and attach using %

Carefully insert two front extension tubes (F) with attached brackets facing out. All four extension legs should be at their lowest position and locked with four height adjustment knobs (H). Set base aside. Front extension tube Figure 4 Figure 3 Place tabletop (B) with preferred side facing down on carpeted or protected floor. Place supplied cardboard template on board surface with edge of template at front edge of board. Left and right edges of template should be an equal distance from each