Before connecting other devices to the mixer, all units have to be switched off and the Master Control (6) set to min. • Make sure that the available voltage is not higher than stated on the voltage selector (22) before connecting to power. • In order to obtain the highest sound quality, only use high quality American DJ®, Ameri-Cable™ cables for connecting devices. Make sure that the cables are properly fixed. • Connect your amplifier to the OUT AMP jacks (19). Make sure that the channels are s

The WR-80 requires some assembly. Please read the following instructions before installing or using your new unit. The WR-80 has a 2 year limited warranty! CAUTION! - Keep this device away from rain and moisture! VHF High Frequency One Channel Wireless Microphone System Features: • Uni-directional VHF Wireless Microphone • Quartz Crystal Oscillator • Volume Control • Power On/Off Switch (Microphone & Receiver) • 8 Frequencies Available • "Battery Low” Light On Microphone This system com

& CANADA MODEL ONLY CAUTION TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE CAREFULLY INSERTED TO PREVENT BLADE EXPOSURE WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS MEDIA PLAYER TO WATER OR MOISTURE CAUTION: USE OF CONTROLS OR ADJUSTMENTS OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE THE MEDIA PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QU

90058 Rev. 10/01 Titan™ General Unpacking: Thank you for purchasing Titan™ by American DJ ® . Every Titan™ has been thoroughly perfect operating condition. damage that may have to be damaged, carefully inspect all accessories necessary to event damage has been found toll free customer support number return the unit to your dealer without contacting customer support. Introduction: Thank you for purchasing the American DJ ® Titan. ™ The Titan™ is a unique multi-colored effects fixture. The unit co

Never touch lampj iwith bare fingers as the oil from your| lhands will shorten lamp life. Also, neverl ■move fixture until lamp has had ample1 ¡time to cool. Remember, lamps are notj icovered under warranty conditions. | C a ut i o n ! Always disconnect from main power before replacing lamps or servicing unit. Remember to always replace with same lamps and fuses. Thank you for purchasing this Amer/can DJ® product. For your convenience this lighting effect has been lamped and is ready to be use

Working Position: Any Safe position. Motor Speed: 6 rpm. Duty Cycle: 10 min. on, 10 min. off. HALOGEN LAMP WARNING! ~\ This fixture is fitted with halogen j lamps which are highly suscepti- | ble to damage if impro p e r l y i handled. Never touch lamp with I bare fingers as the oil from your j hands will shorten lamp life. Also, | never move fixture until lamp I has had ample time to cool. j Remem b e r, lamps are not cov- | ered under warranty conditions. i INSTALLATION: After pl

on 10 min. off Fan cooled High quality glass lens Reflective dichoric mirror HALOGEN LAMP WARNING! This fixture is fitted with a halogen lamp which is highly susceptible to damage if improperly handled. Never touch lamp with bare fingers as the oil from your hands will shorten lamp life. Also, never move fixture until lamp has had ample time to cool. Remember, lamps are not covered under warranty conditions. Operating Instructions: Unit is ready to be hung or set on flat surface. After plugg

90058 Sparkle™ Introduction Introduction: Thank you for purchasing the Sparkle™ by American DJ®. For your convenience the Sparkle™ has been lamped and tested before being shipped to you. The unit is ready to be used, there is no assembly required. Please read the following instructions before attempting installation or using your new Sparkle™. Customer Support: American DJ® provides a toll free customer support line, to provide set up help and to answer any question should you encounter pro

Never touch lamp iwith bare fingers as the oil from your lhands will shorten lamp life. Also, never •move fixture until lamp has had ample ¡time to cool. Remember, lamps are not icovered under warranty conditions. C a ut i o n ! Always disconnect from main power before replacing lamps or servicing unit. Remember to always replace with same lamps and fuses. Model: SPACE BALLS™ SPECIFICATIONS: Lamp: 2 x ZB-64514 120V 300W, Dimensions: 21.5" x 12" x 11" Weight: 11 lbs. Supply Voltage: 120V Fu

Keep away from direct sunlight and heaters. Operate the mixer only after becoming familiar with its functions. Do not permit operation by persons not qualified for operating the mixer. Most damages are the result of unprofessional operation! Never use spray cleaners to clean the faders! Never use solvents or abrasive detergents to clean the mixer! It is recommended that you use a soft damp cloth. Please consider that unauthorized modifications on the device are forbidden due to safety reasons! C